To remove and replace the spark plugs on a 2004 Honda Pilot, you will need a 5/8″ spark plug socket. This size socket is commonly used for spark plug replacement on Honda vehicles.
Please note that it is always a good idea to consult the vehicle’s manual or a trusted mechanic for specific instructions and recommendations when performing maintenance tasks on your vehicle.
Contents
- What size socket do I need for Honda spark plugs?
- What size socket is a 2003 Honda Accord spark plug?
- Do I need a special socket for spark plugs?
- What size socket wrench for a NGK spark plug?
- How many spark plugs does a 2004 Honda Fit have?
- What size socket do I need to remove spark plugs?
- Do you need a special socket to remove spark plug?
- How many spark plugs are in a 2004 Honda Pilot?
- What size socket is a 2004 Honda Accord spark plug?
- Are all spark plugs 14mm?
What size socket do I need for Honda spark plugs?
These plugs must be removed with a thin wall 12 point 14mm socket. Spark plug sockets have a magnet or a rubber sleeve that grips the plug, helping you pull it out of the head.
What size socket is a 2003 Honda Accord spark plug?
14mm Spark Plug Socket.
Do I need a special socket for spark plugs?
Spark Plug Sockets
These special sockets contain rubber isolators inside intended to absorb any possible vibration within and protect the glass featured along the spark plug. Regular sockets do not contain the rubber feature and using them may result in breakage when attempting a spark plug replacement.
What size socket wrench for a NGK spark plug?
Most plugs take a 5/8″ socket, but some take 13/16″ or 3/4″.
How many spark plugs does a 2004 Honda Fit have?
The eight-valve i-DSI (intelligent Dual and Sequential Ignition) engines use two spark plugs per cylinder, allowing gasoline to burn more completely; therefore, fuel consumption and emissions are reduced while maximum torque at mid-range rpm is maintained.
What size socket do I need to remove spark plugs?
Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
Do you need a special socket to remove spark plug?
Though you can technically use any socket of the right size, we recommend using the kind specifically made to pair with spark plugs. These special sockets contain rubber isolators inside intended to absorb any possible vibration within and protect the glass featured along the spark plug.
How many spark plugs are in a 2004 Honda Pilot?
6
Iridium IX spark plug. Quantity per car: 6.
What size socket is a 2004 Honda Accord spark plug?
Locate the spark plug at the bottom of the bore. Use a ratchet, extension, and 5/8 inch socket to remove the plug by turning counterclockwise until it’s free.
Are all spark plugs 14mm?
It depends. They’re not all the same, especially if you include small engine and motorcycle plugs. 5/8″ and 13/16″ are the most common. Sometimes you see 3/4″, 18mm, and rarely 15mm.
