AHG Auto Service » Make » Toyota » What size socket is the oxygen sensor on a Toyota mr2?

What size socket is the oxygen sensor on a Toyota mr2?

The oxygen sensor on a Toyota MR2 is typically a 7/8″ socket size or a little over 22 mm. This size socket is commonly used to remove the oxygen sensor from the stock 1ZZ engine. It is recommended to use an oxygen sensor removal socket to easily remove a bad O2 sensor.

What size are O2 sensor nuts?

This O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor on exhaust pipe. You can also purchase an optional O2 Sensor Plug if the sensor ever needs to be removed.

Are all Toyota oxygen sensors the same?

They have the same number of wires. They look the same. But they operate. Completely different which takes us to air fuel ratio sensors. People are often confused by them.

What size is oxygen sensor socket?

Size- Fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Warranty: We offer 30 days free return and 365 days free warranty.

Are all O2 sensors the same wrench size?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

What should normal O2 sensor readings be Toyota?

Connect your voltmeter to the oxygen sensor and read the voltage signals. A good oxygen sensor fluctuates between 100mV and 900mV. Anything above or below that range is an indicator of a bad oxygen sensor.

Are Toyota O2 sensors universal?

This means many aftermarket oxygen sensors are “universal” fit. Many car owners have to do extra wiring work and/or buy extra connectors to ensure compatibility with their car. OEM oxygen sensors are specifically designed to work optimally with your Toyota’s ECU.

What size socket is a Denso oxygen sensor?

7/8″
A: The tool is a 7/8″ socket with slot, essentially. It appears the Denso is like the vast majority of oxygen sensors, in that it has compatible 7/8″ hex drive.

What size socket is a Toyota oxygen sensor?

The 7/8 “ O2 Socket will work most of the time.

Do you need a special tool for O2 sensors?

Unplug the wire at the connector and remove O2 sensor. They dosell a special tool, but you can do it with a crescent wrench. Use some liquid wrench first.The oxygen sensors will make sure that your car has plenty of oxygen and won’t suffocate and, for that reason, it’s important to replaceall your oxygen sensors.

Do all O2 sensors use the same socket?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment