What size socket is the oil filter on a 2005 Chevy Cavalier?

Oil Filter Socket Size for 2005 Chevy Cavalier
Based on the information from the search results, the oil filter on a 2005 Chevy Cavalier requires a specific socket size to remove it. The search results provide the following information:
– The oil filter on a 2.2 lt ecotec motor, 2005 Cavalier is located directly below the #4 piston air intake manifold, approximately 4” below. It’s a black 3” dia. cap which takes an 11/4” short socket with a 8”, 1/2” drive extension & ratchet to remove it.
– Another source mentions that the oil filter cap can be removed with a 1 3/8″ socket and an extension. It is advised to break the seal with the socket and extension, and then turn it off by hand.
– Additionally, it is stated that the oil filter cap can be opened with a 1 1/4 inch socket wrench, with an extender. The filter snaps onto the bottom of the black cap with the point on the filter facing down. The black cap will be facing up at you.
In summary, the oil filter on a 2005 Chevy Cavalier requires a socket size of 11/4” or 1 3/8″ to remove the cap, along with an extension for ease of access.
It’s important to ensure that the correct socket size is used to avoid any damage to the oil filter cap during removal.
If you have any further questions or need additional assistance, feel free to ask!

What size socket is the oil filter on a Chevy Cavalier?

32mm
Chevy 32mm Oil Filter Cartridge Wrench Socket Tool Part Ecotec HHR Cavalier S10.

What wrench is used for oil filter?

An oil-filter wrench is a tool for removing spin-on type oil filters. Chain-type oil-filter wrench. The chain is wrapped around a spin-on oil filter, and the hexagonal bar is turned anticlockwise to grip and unscrew the filter. Strap-type oil-filter wrench.

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

Do I need a special wrench to remove oil filter?

But it still works and i’ll show. You. So i knocked a hole in it we’re gonna let that drain. Out. And there it goes.

What size socket is the oil filter cap on a 2003 Chevy Cavalier?

Use a 32 mm (1 1/4 inch) socket (1) on the hex on the top of the oil filter cap, or an Oil Filter Wrench on the outside diameter of the oil filter cap.

What do I need to change my 2005 Chevy Cavalier oil?

And you also need a drain pan to catch that. Oil. Okay guys and the first thing i’ll show you here is the best way to get to the drain plug. Um is to be laying.

Where is the oil filter located on a 2005 Chevy Cavalier?

And take a look at the oil plug so I’m going to be taking off the oil plug. And this is a 15 mm.

How many quarts of oil does a 2005 Chevy Cavalier take?

5 quarts
Oil Grade: SEO23

Viscosity:	All TEMPS….5W-30 – SAE 5W-30 is preferred. Below -20 F .0W-30
Capacity:	With filter 5 quarts. After refill check oil level.
Torque:	Oil Drain Plug…18 ft/lbs

What is the size of oil filter socket?

The low profile socket fits both the 35mm and 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8″ drive. Not for use with an impact wrench.

Is an oil filter socket the same as a regular socket?

And oil filter wrenches often accommodate a range of oil filter sizes, unlike sockets which are intended for a specific canister diameter. If you’ve got enough room to swing a wrench handle around the body of the canister, those regular wrenches can do the job without a lot of fuss.