What size socket is the O2 sensor on the Acura RSX?

O2 Sensor Socket Size for Acura RSX
The O2 sensor socket size for the Acura RSX is 7/8 inches or 22 mm. This size is commonly used for removing and installing O2 sensors in the Acura RSX. Users have reported success using a 7/8 O2 sensor socket to remove and replace the O2 sensors in the Acura RSX.
If you have any further questions or need additional assistance, feel free to ask!

Contents

Where is the 02 sensor on Acura RSX?
What size ratchet is a O2 sensor?
How many O2 sensors are on a 2002 Acura RSX?
What size is the O2 sensor socket?
Are all O2 sensor sockets the same size?
Which O2 sensor is sensor 2?
Are all 02 sensors the same socket size?
What size socket is the rsx 02 sensor?
What size are O2 sensor nuts?
What tools do you need to change an O2 sensor?

Where is the 02 sensor on Acura RSX?

Which is located right underneath steering wheel close to the firewall. You can see it there. And I’m gonna go ahead and plug it. In. So you pretty much just match.

What size ratchet is a O2 sensor?

7/8″ (22mm). Many times the O2 sensor will be bound pretty tightly, an open end wrench will most likely round off the hex. Get an O2 sensor socket, or you can get a regular deep 7/8″ socket, cut the wires to the old O2 sensor, and take it off with the regular socket. I find that a 10″ cresent wrench works well.

How many O2 sensors are on a 2002 Acura RSX?

There are 2 on your RSX, the air/fuel ration sensor which is upstream and the one you need and the downstream O2 sensor. Was this answer helpful?

What size is the O2 sensor socket?

Dimensions

Drive Size	3/8 in	Product Depth (in.)
Product Height (in.)	1.4 in	Product Width (in.)
Socket Size	7/8 in

Are all O2 sensor sockets the same size?

【Size】 7/8 inch (22 millimeter) hex fits almost all oxygen sensors.

Which O2 sensor is sensor 2?

The Sensor 2 in question means that it is the sensor that is located behind your catalytic converter and the Bank 2 side of the engine is the side that does not contain the #1 cylinder.

Are all 02 sensors the same socket size?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

What size socket is the rsx 02 sensor?

Yeah it’s 7/8 O2 socket, just confirmed.

What size are O2 sensor nuts?

This O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor on exhaust pipe. You can also purchase an optional O2 Sensor Plug if the sensor ever needs to be removed.