What size socket is the O2 sensor on a 2002 Toyota Camry?

O2 Sensor Size for 2002 Toyota Camry
The O2 sensor on a 2002 Toyota Camry typically requires a 7/8″ (22mm) socket for removal and installation. This size is commonly used for O2 sensors in various vehicles, including the 2002 Toyota Camry.
It’s important to note that the O2 sensor socket is designed with a slit to accommodate the sensor’s wires, making the removal and installation process easier. Using the correct size socket and the appropriate tools can help prevent damage to the sensor and ensure a smooth replacement process.
If you have any further questions or need additional assistance, feel free to ask!

Are all 02 sensors the same socket size?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

How do you remove the sensor connector on a Toyota O2?

To do this, find the connector and stick one or two fingers behind it. Simultaneously squeeze the release tab and pull up on the connector to disconnect it. Remove the oxygen sensor. You need the 22-millimeter wrench for this.

What kind of socket would you use for an oxygen sensor?

There are several types of oxygen sensor sockets, including the standard socket, which is similar to a deep well socket but with a slot for the wiring, and the offset wrench style, which can offer better leverage in tight spaces.

What tools do I need to change an oxygen sensor?

Things You’ll Need

1. New oxygen sensors.
2. Jack.
3. Jack stands.
4. 3⁄8 in (0.95 cm) ratchet wrench or open end wrench.
5. 7⁄8 in (2.2 cm) oxygen sensor socket.
6. Penetrating oil.
7. Auto diagnostic scanner/reader (optional)
8. Flathead screwdriver (optional)

What size are O2 sensor nuts?

This O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor on exhaust pipe. You can also purchase an optional O2 Sensor Plug if the sensor ever needs to be removed.

What tools do I need to change O2 sensor?

Things You’ll Need

• New oxygen sensors.
• Jack.
• Jack stands.
• 3⁄8 in (0.95 cm) ratchet wrench or open end wrench.
• 7⁄8 in (2.2 cm) oxygen sensor socket.
• Penetrating oil.
• Auto diagnostic scanner/reader (optional)
• Flathead screwdriver (optional)

What size socket is the O2 sensor on a Toyota Corolla?

Toyota Corolla O2 Sensor Sockets. Universal 7/8″ Oxygen Sensor Socket by Performance Tool®.

What size is an O2 sensor socket?

7/8 inch
【Size】 7/8 inch (22 millimeter) hex fits almost all oxygen sensors.

Do all O2 sensors use the same socket?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

What size socket is the O2 sensor on a Toyota Camry?

Toyota Camry O2 Sensor Sockets. Universal 7/8″ Oxygen Sensor Socket by Performance Tool®.