What size socket is the lug nut on a Acura TSX?

Lug nut size for Acura TSX
The stock lug nut size for an Acura TSX is M12 x 1.5. This refers to a metric thread size of M12 (12mm diameter) with a 1.5mm pitch.
The socket size needed to remove these lug nuts is 19mm. Some sources also mention that a 3/4″ socket can be used, as 3/4″ is approximately equal to 19mm.
Additional details
– The lug nuts have a metric M12 thread with a pitch of 1.5mm. The “1.5” in M12x1.5 refers to the thread pitch, not a diameter in inches.
– All nuts and bolts on the Acura TSX are metric.
– 5 lug nuts are used, with a hub bore/center bore size of approximately 67mm.
– The recommended torque for lug nuts on the TSX is 80 ft-lbs. Torque values vary depending on the size of the wheel studs.

Contents

Do you need a special socket for lug nuts?
What size are the lug nuts on a 2005 Acura TSX?
What size are the lug nuts on a 2008 Acura TSX?
What size do you have to be to remove lug nuts?
What size socket do I need for my lug nuts?
Do you need a special socket to remove lug nuts?
What size socket is the lug nut on a Acura?
What size socket is a 2012 Acura TSX lug nut?
Are Acura bolts metric?
What size are the lug nuts on a Acura TSX?

Do you need a special socket for lug nuts?

Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.

What size are the lug nuts on a 2005 Acura TSX?

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831″ Length, Chrome (Sold by each) (Part No. 611-183)

What size are the lug nuts on a 2008 Acura TSX?

Dorman – Wheel Lug Nut: M12-1.50 Thread, Flanged, Mag, 1.45″ Length, Chrome (Sold by each) (Part No. 611-104)

What size do you have to be to remove lug nuts?

For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

What size socket do I need for my lug nuts?

4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

What size socket is the lug nut on a Acura?

When disassembling the wheels, you must first remove all the stock Acura RDX lug nuts. The socket size of Acura RDX lug nuts is 19mm (3/4″). Whether you use a lug wrench, torque wrench, impact socket, or regular socket, you’ll need the correct size to remove or tighten lug nuts.