What size socket is the axle nut on a Toyota Tundra?

Axle Nut Size for Toyota Tundra
The axle nut size for a Toyota Tundra varies depending on the model year. From 1999 to 2007, the axle nut size is 35mm (1-3/8), while from 2008 to the present, the size is 39mm (1-1/2). However, if the axle has been replaced with an aftermarket product, the nut can interchange between 35mm and 39mm. It’s important to note that if the nut is a 12-point star-shaped nut, then a 39mm 12-point socket is required.
It’s worth mentioning that the Lisle 39650 39mm Axle Nut Socket is specifically designed for Toyota Tundra and is recommended for removing and installing axle nuts on 4WD axle hubs on Toyota / Lexus SUV models, including the 2007-2010 Toyota Tundra.
Therefore, for a Toyota Tundra from 2008 to the present, a 39mm 12-point socket is the appropriate tool for removing the axle nut.
If you have any further questions or need additional assistance, feel free to ask!

What size socket do I need to remove an axle nut?

There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.

What size socket do you need for a CV axle?

36mm is correct. Make sure it’s attached to a decent breaker bar; those things are on there pretty tight.

What size socket is the axle nut on a Toyota Tacoma?

It is definitely a 35mm.

What size is Toyota CV axle nut?

OEM is 35mm, most aftermarket are 36mm. Do different 4runners have different size rear axle shafts?

What size is the axle nut on a CV axle?

The stock one should thread on fine though so you can just reuse it if you don’t want to buy a second socket. OEM is 35mm, most aftermarket are 36mm.

What size is the socket on a Toyota axle nut?

The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16″ 12 point.

What size is the axle nut on a 2008 Toyota Tundra?

Marlon, I’m 98% sure that 39mm is right.

What size socket fits a Toyota axle nut?

The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16″ 12 point.

What size socket is the axle nut on a 2010 Chevy Silverado?

36mm
Front Wheel Hub and Bearing Assembly and Socket Kit – with 36mm Axle Nut Socket – Compatible with 2007 – 2013 Chevy Silverado 1500 2008 2009 2010 2011 2012.

What size nut is on a axle nut?

Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.