What size socket is the axle nut on a 2010 Chevy Silverado?

The axle nut size on a 2010 Chevy Silverado can vary depending on the specific model and year. However, according to the search results, the axle nut size for the Chevrolet Silverado 1500 from 1999 to 2013 is 36mm (1-7/16), while for the 2014 models onwards, the nut size is 35mm (1-3/8).
It is worth noting that aftermarket nut sizes can vary, so it is recommended to have both 35mm and 36mm sockets available when working on your truck’s axles. If you don’t have both sizes, you can purchase both and then return the one you don’t end up using.
Please keep in mind that these sizes are based on the information provided in the search results, and it’s always a good idea to double-check with the manufacturer or consult a professional if you have any doubts or specific requirements for your vehicle.

How tight should axle nut be?

It can be different for different manufacturers. And also the torque spec can be a lot different anywhere from 95 foot-pounds all the way up to 250 foot pounds depending on the application.

How do you remove axle cap nuts?

The star washer. And with our open-end wrench. We can come in here and you’re just gonna crush. Hard to do while holding but here we go you’re going to crush the cap nut.

What is the torque on the axle nut on a 2013 Chevy Silverado 1500?

Notes: Axle nut torque: 188 lb. ft/255 Nm. 6 stud. Quantity per car: 2.

What size nut is on a axle nut?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

What size bolt is on a CV axle?

As you have found, it is a M10X1. 5X25 grade 10.9 bolt.

What size are axle bolts?

The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.

What size socket do I need to remove an axle nut?

There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.

What is the torque on the axle nut on a 2010 GMC Sierra 1500?

177ft lbs
Using a torque wrench, torque the hub bolts you just put in to 133ft lbs. Next, torque the axle nut to 177ft lbs.

What can I use to remove an axle nut?

Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.

What size socket do you need for a CV axle?

36mm is correct. Make sure it’s attached to a decent breaker bar; those things are on there pretty tight.