AHG Auto Service » Make » Honda » What size socket is a Honda CRV lug nut?

What size socket is a Honda CRV lug nut?

The lug nut size for a Honda CRV is 19mm .

What size socket is a 2005 Honda CR-V lug nut?

M12 x 1.5. 3/4 Hex.

What type of lug nuts are on Honda CRV?

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831″ Length, Chrome (Sold by each) (Part No. 611-183)

What size is Honda lug nut?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.

What is the most common lug nut socket size?

Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size are the lug nuts on a 2007 Honda CRV?

M12x1. 5 Bulge Acorn Locking Wheel Lug Nuts (3/4″ and 13/16″ Hex)

What size socket is a 2017 Honda CRV lug nut?

The lug nut socket size for a 2017 Honda CR-V is going to be 19 inches. The nuts are going to have a total length of 0.768 inches and a thread size of M12 X1. 50. The torque needed to remove the lug nuts is going to be 80 ft-lbs of torque.

What size are the lug nuts on a 2018 Honda CRV?

M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4″ Hex – Conical Seat)

What size are the lug nuts on a Honda CR-V?

Honda CRV Lug Nuts Sizes
2002-2006: 12×1.5 mm, 19mm socket. 2007-2011: 12×1.5 mm, 19mm socket. 2012-2016: 12×1.5 mm, 19mm socket. 2017-2021: 12×1.5 mm, 19mm socket.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment