Honda Accord Lug Nut Socket Size
The socket size for Honda Accord lug nuts is 19mm. Whether using a lug wrench, torque wrench, impact socket, or regular socket, a 19mm socket is required to remove or tighten Honda Accord lug nuts.
This information is consistent across multiple sources and should provide the necessary tool size for working with Honda Accord lug nuts.
Contents
- What size is a Honda lug nut?
- Do you need a deep socket to remove lug nuts?
- Are Honda bolts standard or metric?
- Are lug nuts standard size?
- Do you need a special socket to remove lug nuts?
- What is the wrench on a Honda Accord?
- Does Honda use metric or standard?
- What size socket is a 2006 Honda Accord lug nut?
- What size are the nuts on a Honda Accord?
- What size socket do I need for lug nuts?
What size is a Honda lug nut?
The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.
Do you need a deep socket to remove lug nuts?
Shallow 3/4 drive sockets will work but you then can end up with the breaker bar or ratchet hitting the tire or the body. I like to use a deep socket and a long handled breaker bar. Or, a long breaker bar that swivels.
Are Honda bolts standard or metric?
metric system
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.
Are lug nuts standard size?
There is no standard lug nut size. It could be 17,18,19,20,21,22 or even 24 mm. Or 3/4″, 15/16″, 7/8″, 13/16″. It all depends on the vehicle.
Do you need a special socket to remove lug nuts?
Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.
What is the wrench on a Honda Accord?
Maintenance Minder
Maintenance Minder
In your Honda Accord, this symbol looks like an orange wrench, and it works to keep you on top of any recommended service appointments. So when it comes on, its simply alerting you that its time to schedule a maintenance procedure at Norm Reeves Honda Cerritos.
Does Honda use metric or standard?
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.
What size socket is a 2006 Honda Accord lug nut?
12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.
What size are the nuts on a Honda Accord?
The thread size of Honda Accord lug nuts is M12x1.
For a new Honda Accord model, there are 20 pcs lug nuts to fasten the wheels. The bolt pattern is 5×114.3, so each wheel has 5 pcs lug nuts. But some old models use 16 pcs lug nuts to secure the wheels.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
