Ford Ranger Wheel Nut Socket Size
The socket size needed for the wheel nut of a Ford Ranger varies depending on the specific model and year. Here’s a summary of the information from the search results:
– The Ford Ranger lug nut size is Thread size: 1/2″-20 and Hex size: 20.6 mm.
– Ford Rangers (model years 1983-2011) use M12 x 1.5 wheel nuts, which means the threads are 12mm in diameter and have a 1.5mm pitch between threads.
– The front axle nut is secured with a 32 mm socket.
Based on this information, the socket size needed for the wheel nut of a Ford Ranger can be either 20.6 mm or 32 mm, depending on the specific model and year. It’s important to verify the exact size for a specific vehicle to ensure the correct socket is used.
If you have a specific model and year of the Ford Ranger in mind, it would be best to consult the owner’s manual or contact a Ford dealership for the most accurate information.
Contents
- What size socket do I need to remove lug nuts?
- What size is a truck wheel nut?
- What is the standard wheel nut size?
- Are Ford lug nuts metric or standard?
- Can you use a socket wrench on lug nuts?
- Does Ford use metric or standard sockets?
- What size socket is a Ford lug nut?
- What size are the wheel nuts on a Ford?
- What power tool do I need to remove lug nuts?
- What socket size are wheel nuts?
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size is a truck wheel nut?
Most common commercial lug nut size, the 33mm is used for most medium and heavy duty trucks. Compare to 1-5/16” A secondary light truck lug nut size.
What is the standard wheel nut size?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Are Ford lug nuts metric or standard?
Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.
Can you use a socket wrench on lug nuts?
Yes, provided that: You have the correct size socket, and it is long enough to fit securely over the wheel lugs. Your socket wrench is sturdy, with a long handle to apply the needed force.
Does Ford use metric or standard sockets?
metric
Are Ford bolts metric or standard? Yes. Ford has sourced both for various vehicle over the years. While it’s a general trend that the newest cars are all metric, there are stubborn applications where older “standard” bolts are still used.
What size socket is a Ford lug nut?
To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
What size are the wheel nuts on a Ford?
Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.
What power tool do I need to remove lug nuts?
Impact wrenches
Impact wrenches deliver more torque than impact drivers and are used for heavy-duty tasks such as removing lug nuts or large bolts. Impact drivers, on the other hand, are more compact and used for driving screws and smaller bolts.
What socket size are wheel nuts?
The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.