Dodge Charger Lug Nut Socket Size
The size of the socket needed to remove the lug nuts on a Dodge Charger is 22mm. It’s important to note that it should not be an impact socket, but a regular 22mm socket.
This information is consistent across multiple sources, and it’s important to use the correct size to avoid damaging the lug nuts or the socket itself.
Contents
- Can I use a socket to remove lug nuts?
- What size socket do I need for my lug nuts?
- What size impact wrench do I need to remove lug nuts?
- What size socket is a 2013 Dodge Charger lug nut?
- What size socket for Dodge Challenger lug nuts?
- What size lugs are on a Dodge Charger?
- What size socket is a 2018 Dodge Charger lug nut?
- What size are the lug nuts on a 2017 Dodge Charger?
- Do you need a special socket for lug nuts?
- What size do you have to be to remove lug nuts?
Can I use a socket to remove lug nuts?
On some locking lug nuts you can hammer on a ⅞ 12 point socket and remove the locking lug bolt instead of using the special key. The hardest part is that you also need a vice to put the socket in to hit the locking lug nut off with a punch.
What size socket do I need for my lug nuts?
4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size impact wrench do I need to remove lug nuts?
A 1/2-inch impact wrench is essential for any heavy-duty automotive work. We tested a bunch of the most popular brands on the market; here are the ones to buy. A tool’s value lies in its ability to ease demanding tasks. Among power tools, the impact wrench stands out for removing stubborn lug nuts and rusted bolts.
What size socket is a 2013 Dodge Charger lug nut?
14 mm x 1.50 thread size, 13/16″ hex.
What size socket for Dodge Challenger lug nuts?
The socket sizes of Dodge Challenger lug nuts are 13/16″. In other words, you would need a 22mm hex socket to fit.
What size lugs are on a Dodge Charger?
Lug Pattern for a Dodge Charger: Center Bore & Lug Nuts
During these model years the bolt pattern for a Dodge Charger is 5×4.5″ (5×114.3mm) and the center bore is 71.6 mm, and there are five lug nuts with 1/2″ – 20 UNF thread size.
What size socket is a 2018 Dodge Charger lug nut?
M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.
What size are the lug nuts on a 2017 Dodge Charger?
M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4″ and 13/16″ Hex)
Do you need a special socket for lug nuts?
Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.
What size do you have to be to remove lug nuts?
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
