What size socket is a Dodge Challenger lug nut?

Dodge Challenger Lug Nut Socket Size
The lug nut socket size for a Dodge Challenger is 21mm. This applies to both the R/T and SRT models, and it’s important to use a 21mm deep impact socket (6 point) to remove/replace the lugs. Using a 12 point socket may correctly fit but can cause damage to the lug nut finish due to the high torque involved.
It’s worth noting that there are some conflicting opinions and experiences regarding the socket size, with some users mentioning 22mm and 13/16″ sockets. However, the most consistent information from the search results indicates that a 21mm socket is the correct size for the lug nuts on a Dodge Challenger [[4]].
If you need to replace the lug nuts and prefer alternatives to OEM, the Gorilla lugs are recommended and have a positive reputation. These are available in 14mm x 1.5mm conical seat, bulge, 60 deg. seat, and a set of 4 costs $7.39.

What size lugs are on a Dodge Charger?

Lug Pattern for a Dodge Charger: Center Bore & Lug Nuts
During these model years the bolt pattern for a Dodge Charger is 5×4.5″ (5×114.3mm) and the center bore is 71.6 mm, and there are five lug nuts with 1/2″ – 20 UNF thread size.

What size are the lug nuts on a 2014 Challenger?

14 mm x 1.50 thread size, 13/16″ hex.

What size socket is a 2018 Dodge Charger lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size are the lug nuts on a 2018 Challenger?

25.4 mm lug outside diameter. Verify lug nut to wheel mating surface for proper and safe fitment. Thread size: M14-1.50.

What size do you have to be to remove lug nuts?

For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

What size are the lug nuts on a 2015 Dodge Challenger?

The 2015 Dodge Challenger lug nut size is 22 mm hex. Making sure Your tires are in the greatest of condition is key to not crashing.

What size socket do I need for my lug nuts?

4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size are the lug nuts on a 21 Challenger?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size socket is a 2016 Dodge Charger lug nut?

22mm is the Socket Size, I just tried it out.