AHG Auto Service » Make » Chevrolet » What size socket is a Chevy O2 sensor?

What size socket is a Chevy O2 sensor?

The size of the socket needed for a Chevy O2 sensor is 7/8 inches or 22mm . This size socket is commonly used for removing and installing oxygen sensors in many vehicles. It is recommended to use an O2 sensor socket with a cut-away slot to clear the sensor wire and simplify the installation or removal process.

What size socket is the O2 sensor on a Chevy Silverado?

Chevy O2 Sensor Sockets. Universal 7/8″ Oxygen Sensor Socket by Performance Tool®.

Do you need a special tool to remove O2 sensor?

Unplug the wire at the connector and remove O2 sensor. They dosell a special tool, but you can do it with a crescent wrench. Use some liquid wrench first.The oxygen sensors will make sure that your car has plenty of oxygen and won’t suffocate and, for that reason, it’s important to replaceall your oxygen sensors.

What tools do I need to change O2 sensor?

Things You’ll Need

  • New oxygen sensors.
  • Jack.
  • Jack stands.
  • 3⁄8 in (0.95 cm) ratchet wrench or open end wrench.
  • 7⁄8 in (2.2 cm) oxygen sensor socket.
  • Penetrating oil.
  • Auto diagnostic scanner/reader (optional)
  • Flathead screwdriver (optional)

What kind of socket would you use for an oxygen sensor?

There are several types of oxygen sensor sockets, including the standard socket, which is similar to a deep well socket but with a slot for the wiring, and the offset wrench style, which can offer better leverage in tight spaces.

What size is the O2 sensor plug?

*Most cars and older motorcycle oxygen sensor’s utilize the M18x1. 5mm thread pitch. Newer motorcycles use a smaller O2 sensor with a M12x1. 25mm thread pitch.

How do you remove an O2 sensor socket?

And even getting around obstruction. This oxygen sensor socket has a wire gate which allows you to easily Slide the socket over the wires.

What size nut fits a O2 sensor?

8 x 1.5mm
This O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor on exhaust pipe. You can also purchase an optional O2 Sensor Plug if the sensor ever needs to be removed.

Is there a special tool to remove an O2 sensor?

Whatever your vehicle needs, the Shockit™ Socket O2 Sensor Removal Kit has the right tool for the job. To make your experience even more effortless, we’ve included a non-slip self-centering air hammer powered offset 11” Standard Shockit™ Punch.

Are all O2 sensor sockets the same size?

7/8ths is the Imperial equivalent of decimal 22mm. O2 sensors are all pretty much standard in size.

What size wrench is a Chevy O2 sensor?

【Size】 7/8 inch (22 millimeter) hex fits almost all oxygen sensors.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment