What size socket is a 2016 Honda Odyssey lug nut?

The lug nut size for a 2016 Honda Odyssey is 7/8″.

What size socket are the lug nuts on a Honda Odyssey?

The most common thread sizes that are used by Odyssey RC1/ RC2/ RC4 are M12x1. 5mm. However, the Odyssey RL6 uses M14x1. 5 lug nuts.

What size is Honda lug nut?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size socket is a 2018 Honda Odyssey lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size are Honda wheel nuts?

M12 x 1.5, 19mm Hex Radius set of 16.

What size are Honda lug nuts?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

Is 3 4 the same as 19mm?

18mm = just over 11/16 inch. 19mm = 3/4 inch. 20mm = 25/32 inch.

What size are the lug nuts on a 2016 Honda Odyssey?

7/8″ hex
Notes: Nut. 14 mm x 1.50 thread size, 7/8″ hex.

What size are the lug nuts on a 2015 Honda Odyssey?

Verify lug nut to wheel mating surface for proper and safe fitment. Thread size: M14-1.50.