What size socket is a 2016 Dodge Charger lug nut?

Dodge Charger Lug Nut Socket Size
The lug nut socket size for a 2016 Dodge Charger is 22mm. This size is specified for the lug nut socket to remove the wheel fasteners, and it is recommended to use a 22mm socket for this purpose .
It’s important to note that the thread size for the lug nuts is M14x1.5, and the torque required to replace the lug nuts is 176 Nm.
If you’re looking to replace the lug nuts, it’s advisable to consider aftermarket options, as they may offer improved performance and aesthetics.
In summary, for a 2016 Dodge Charger, the lug nut socket size is 22mm, and it’s recommended to use a torque of 176 Nm for replacement, with a thread size of M14x1.5 .

What size socket is a Dodge Ram lug nut?

They use a M14X1. 50 lug nut, 22mm socket to remove.

What size are the lug nuts on a 2017 Dodge Charger?

M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4″ and 13/16″ Hex)

What size are the lug nuts on a 2016 Challenger Scat Pack?

The lug nut socket size on a Dodge Challenger (for most years, which is handy, since you’ve not asked about a specific one) is going to be 21 millimetres.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

What size socket is a 2017 Dodge Charger lug nut?

The 2017 Dodge Charger is equipped with A5 X114. 3 mm lug nut pattern and uses a 22mm socket to remove its wheel fasteners. To replace the lug nuts use a torque of 176 Nm and a thread size of M14 X1. 5.

What size socket for Dodge Challenger lug nuts?

The socket sizes of Dodge Challenger lug nuts are 13/16″. In other words, you would need a 22mm hex socket to fit.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size lug nuts are on a 2016 Dodge?

14 mm x 1.50 thread size, 13/16″ hex.

What size socket is a 2018 Dodge Charger lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size lugs are on a Dodge Charger?

Lug Pattern for a Dodge Charger: Center Bore & Lug Nuts
During these model years the bolt pattern for a Dodge Charger is 5×4.5″ (5×114.3mm) and the center bore is 71.6 mm, and there are five lug nuts with 1/2″ – 20 UNF thread size.