Lug Nut Socket Size for a 2013 Toyota Venza
The lug nut socket size for a 2013 Toyota Venza is 21mm. This size is commonly used for the lug nuts on the 2013 Toyota Venza. It’s important to use the correct size socket to ensure proper installation and removal of the lug nuts.
It’s always a good practice to verify the lug nut size with the actual nuts on the vehicle to ensure the correct fit.
If you have any further questions or need additional assistance, feel free to ask!
Contents
- What size socket do I need to remove lug nuts?
- Are 13 16 and 21mm the same?
- What size is Toyota lug nut?
- What size are the lug nuts on a 2010 Toyota Venza?
- Do you need a special socket for lug nuts?
- What size wrench for Toyota lug nuts?
- What size socket is a Toyota Venza lug nut?
- Do you need a special socket to remove lug nuts?
- Which is smaller 13 16 or 21mm?
- Will a 13 16 socket fit a 21mm nut?
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Are 13 16 and 21mm the same?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
What size is Toyota lug nut?
12×1. 5 Chrome Mag Lug Nuts fits Factory Toyota/Lexus OE Alloy Wheels
| Thread Size: | 12×1.5, 12×1.5mm, 12mmx1.5, M12x1.5 |
|---|---|
| Hex/Wrench Size: | 21mm – 13/16″ |
| Overall Length: | 1.47″ |
| Shank Diameter: | 18mm |
| Construction: | Through-Hardened Steel |
What size are the lug nuts on a 2010 Toyota Venza?
Thread size: M12-1.50. Verify lug nut to wheel mating surface for proper and safe fitment.
Do you need a special socket for lug nuts?
Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.
What size wrench for Toyota lug nuts?
A standard 21mm socket (1/2″ drive) works fine for me using a 3″ or so extension on the torque wrench. For removal I loosen with a breaker bar direct to the socket.
What size socket is a Toyota Venza lug nut?
12mm x 1.50 thread size, 13/16″ hex.
Do you need a special socket to remove lug nuts?
Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.
Which is smaller 13 16 or 21mm?
21 mm is . 826″, 13/16 is . 812″ . If you are getting a 13/16 socket on those, it’s a pretty sloppy socket.
Will a 13 16 socket fit a 21mm nut?
But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.
