Lug Nut Socket Size for 2011 Toyota Highlander
The lug nut socket size for a 2011 Toyota Highlander is 21mm. This size is commonly used for the lug nuts on Toyota vehicles, including the Highlander. The thread size for the lug nuts is M12-1.50.
It’s important to use the correct socket size when working with lug nuts to ensure a proper fit and avoid damaging the nuts or the wheel. When tightening the lug nuts, it’s also essential to use a torque wrench to apply the correct amount of torque, which for the 2011 Toyota Highlander is typically 76 ft-lbs.
Contents
- What size is Toyota lug nut?
- What size socket is a 2011 Toyota Rav4 lug nut?
- Are lug nut sizes the same?
- What size are the lug nuts on a Toyota Highlander?
- What size socket for 2011 Toyota Camry lug nuts?
- Are 13 16 and 21mm the same?
- Will a 13 16 socket fit a 21mm nut?
- Do you need a special socket to remove lug nuts?
- What is the torque on the Highlander lug nuts?
- What size socket do I need to remove lug nuts?
What size is Toyota lug nut?
12×1. 5 Chrome Mag Lug Nuts fits Factory Toyota/Lexus OE Alloy Wheels
| Thread Size: | 12×1.5, 12×1.5mm, 12mmx1.5, M12x1.5 |
|---|---|
| Hex/Wrench Size: | 21mm – 13/16″ |
| Overall Length: | 1.47″ |
| Shank Diameter: | 18mm |
| Construction: | Through-Hardened Steel |
What size socket is a 2011 Toyota Rav4 lug nut?
The lug nut size for a Toyota Rav4 is M12 x 1.5 or hex size is 21 mm. This means that the lug nuts have a diameter of 12 mm, a thread pitch of 1.5 mm, and a hexagonal shape that fits a 21 mm socket or wrench. This lug nut size fits all Toyota Rav4 models from 2007 to 2023.
Are lug nut sizes the same?
While lug nuts vary in size and thread pitch, one of the most important differences in lug nut type is in the contact point where the lug nut meets the wheel, AKA the lug nut seat. It’s crucial that the lug nut seat and the wheel lug seat match.
What size are the lug nuts on a Toyota Highlander?
The most common thread sizes of 2023 Toyota Highlander lug nuts are M12x1. 5.
What size socket for 2011 Toyota Camry lug nuts?
The Toyota Camry has a lug nut socket size of 21 to 22 mm. The thread size for the lug nuts is m12 X1. 5.
Are 13 16 and 21mm the same?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
Will a 13 16 socket fit a 21mm nut?
But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.
Do you need a special socket to remove lug nuts?
Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.
What is the torque on the Highlander lug nuts?
If you cannot find the vehicle manufacturer’s recommended torque spec, you can use the following as a guide (just for REFERENCE, please inquiry a tire expert): the torque specs of M12x1. 5 2023 Toyota Highlander lug nuts will be 110 – 130NM, Reference 113NM (83.3 Ft-tb).
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
