Lug Nut Socket Size for 2008 Honda Fit
The lug nut socket size for a 2008 Honda Fit is 13/16″ or 19mm.
It’s important to use the correct size socket to ensure proper tightening and loosening of the lug nuts.
Contents
- What size socket is a 2009 Honda Fit lug nut?
- What size is the wheel nut on a Honda Fit?
- What size are the lug nuts on a 2010 Honda Fit?
- What is the common socket size for lug nuts?
- What size are the lug nuts on a 2008 Honda Fit?
- What size is Honda lug nut?
- What size are Honda lug nuts?
- What power tool do I need to remove lug nuts?
- What size socket is a wheel nut?
- What size socket do I need to remove lug nuts?
What size socket is a 2009 Honda Fit lug nut?
M12 x 1.5. 3/4 Hex.
What size is the wheel nut on a Honda Fit?
For Honda Fit 2006-2020 Wheel Nut | Front/Rear | M12-1.50 Bulge | 19mm Hex | 19.5mm Length | Chrome | Steel – Replacement For 90304-SC2-000 | 90304-SC2-003.
What size are the lug nuts on a 2010 Honda Fit?
M12 x 1.5. 13/16 Hex. Lug nuts will not fit OEM lug wrench.
What is the common socket size for lug nuts?
Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size are the lug nuts on a 2008 Honda Fit?
Every generation of Honda Fit comes with a 4×100 bolt pattern. One of the more popular 4-lug bolt patterns out there, you’ll find plenty of wheels to choose from when it’s time to add some flare to your ride.
What size is Honda lug nut?
The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.
What size are Honda lug nuts?
The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.
What power tool do I need to remove lug nuts?
Impact wrenches
Impact wrenches deliver more torque than impact drivers and are used for heavy-duty tasks such as removing lug nuts or large bolts. Impact drivers, on the other hand, are more compact and used for driving screws and smaller bolts.
What size socket is a wheel nut?
OEM wheel bolts are usually 19mm socket, but many aftermarket ones are 17mm. Look for impact sockets with a plastic sleeve to help protect your wheels. You wouldn’t need all 3, but something like this…. they are usually 1/2″ drive with the sleeve though.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
