Lug Nut Socket Size for 2008 Honda CR-V
The lug nut socket size for a 2008 Honda CR-V is 19mm. This size is commonly used for removing and installing the lug nuts on the wheels of the vehicle.
It’s important to use the correct socket size to ensure proper fitting and to avoid damaging the lug nuts or the wheel. Using a 19mm socket will provide the right fit for the lug nuts on the 2008 Honda CR-V.
Contents
- What size are Honda lug nuts?
- What size is a Honda lug nut?
- What size socket do I need to remove lug nuts?
- What size socket is a 2008 Honda Civic lug nut?
- What is the wrench on the Honda CRV?
- Is 3 4 the same as 19mm?
- What size lug nuts does a Honda CR-V have?
- What size are Honda wheel nuts?
- What size lug wrench for Honda CR-V?
- Do you need a special socket to remove lug nuts?
What size are Honda lug nuts?
The most common Honda wheel nut sizes are: 12×1.5 – Used on many Honda sedan models like Accord, Civic. The nut measures 12mm diameter with a 1.5mm thread pitch. 14×1.5 – Used on models like Honda Odyssey.
What size is a Honda lug nut?
The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a 2008 Honda Civic lug nut?
What size socket are Honda Civic lug nuts? Since the lug nuts are 12mm in diameter, you’ll need a 19mm socket to remove and install them. A standard 6-point 19mm socket is the proper tool for getting Honda Civic lug nuts off and on. Make sure you’re using a quality 6-point socket, not a 12-point one.
What is the wrench on the Honda CRV?
Maintenance Minder™
Maintenance Minder™: The Maintenance Minder™ indicator light is a yellow wrench. It comes on when your car is due for routine service, and it will disappear after the necessary maintenance is performed.
Is 3 4 the same as 19mm?
18mm = just over 11/16 inch. 19mm = 3/4 inch. 20mm = 25/32 inch.
What size lug nuts does a Honda CR-V have?
The thread size of OEM Honda CRV lug nuts is M12x1. 5mm and the seat type is ball seat.
What size are Honda wheel nuts?
M12 x 1.5, 19mm Hex Radius set of 16.
What size lug wrench for Honda CR-V?
Honda CRV Lug Nuts Sizes
2002-2006: 12×1.5 mm, 19mm socket. 2007-2011: 12×1.5 mm, 19mm socket. 2012-2016: 12×1.5 mm, 19mm socket. 2017-2021: 12×1.5 mm, 19mm socket.
Do you need a special socket to remove lug nuts?
Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.
