Based on the search results, the lug nut size for a 2007 Ford F150 is 13/16″ or 21mm . It is important to note that some sources mention the use of a 12-point socket, but it is recommended to use a standard 6-point socket to avoid any issues with rolling on the cladding.
Please let me know if there’s anything else I can help you with!
Contents
- What is the wrench on my Ford f150?
- What size wrench for Ford lug nuts?
- What mm is a 13 16 socket?
- Are all Ford wheel nuts the same size?
- Is 13 16 the same as 21mm?
- What size wrench for Ford F150 lug nuts?
- Will a 13 16 socket fit a 21mm nut?
- Are Ford lug nuts metric or standard?
- What size socket do I need to remove lug nuts?
- What size are Ford F150 lug nuts?
What is the wrench on my Ford f150?
The Ford Wrench Light is a dashboard indicator used exclusively on Ford vehicles. This light can be triggered whenever your onboard diagnostics II(OBD II) system detects a throttle control system or transmission-related problem.
What size wrench for Ford lug nuts?
1/2” torque wrench and a 21mm socket. That’s all you need.
What mm is a 13 16 socket?
20.6mm
13/16″(20.6mm) Spark Plug Socket – Genius.
Are all Ford wheel nuts the same size?
Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.
Is 13 16 the same as 21mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
What size wrench for Ford F150 lug nuts?
Officially, they are 21mm. I only had a 12 point socket in that size; no way I was going to torque to 150ft-lb on a sloppy fit 12 point socket. 13/16, 6 point socket fits tighter. Buy the best 6 point 13/16″ or 21mm 1/2″ drive IMPACT socket you can afford.
Will a 13 16 socket fit a 21mm nut?
But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.
Are Ford lug nuts metric or standard?
Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are Ford F150 lug nuts?
Specification of F150 Wheel Nuts: 14×1. 5 Thread, 13/16 Hex, 40mm Height, Conical 60 Degree Seat.
