Based on the search results, the lug nuts on a Ford Bronco are typically M12 x 1.5 in size. You would need a 19mm socket to remove and install these lug nuts. It’s worth noting that the lug nuts on the Bronco are a two-piece design, which can sometimes cause issues. If you’re looking to purchase lug nut locks, the correct size for the lug nuts on a Ford Bronco is also M12 x 1.5.
Contents
- What size are the lug nuts on a 6g Bronco?
- What lug nut size?
- What is the torque on the Bronco lug nuts?
- What size socket is a Ford lug nut?
- Is 21 mm the same as 13 16?
- What size thread are the lug nuts on a Ford Bronco?
- What are the specs of the Ford Bronco lug nuts?
- Does Ford use metric or standard sockets?
- What size are the lug nuts on the 2024 Ford Bronco?
- What size are the lug nuts on the Ford Bronco Sasquatch?
What size are the lug nuts on a 6g Bronco?
Stock lugs are a M12 AKA 19mm.
What lug nut size?
Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What is the torque on the Bronco lug nuts?
The REFERENCE torque spec for lug nuts on a 2021-2024 Ford Bronco Big Bend/ Black Diamond/ Outer Banks/ Badlands/ Heritage Edition/ Wildtrak/ Everglades/ Heritage Limited Edition will be 113 – 135 NM.
What size socket is a Ford lug nut?
To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
Is 21 mm the same as 13 16?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
What size thread are the lug nuts on a Ford Bronco?
The most common thread size of a lug nut on a 2021-2024 Ford Bronco is M12x1. 5mm. For old models like a 1966-1996 Bronco, the lug nut thread is 1/2″-20 UNF. The thread sizes of the lug nuts will vary based on the wheel studs.
What are the specs of the Ford Bronco lug nuts?
Mishimoto Aluminum Locking Lug Nuts, M12 X 1.5, Fits Ford Bronco 2021+
Material | 7075-T6 Aluminum |
---|---|
Thread Size | M12 x 1.5 |
Length (Inches) | 1.97 |
Applications | Acura Chevrolet Honda Hyundai Lexus Mazda Mitsubishi Scion Toyota Volvo |
Weight (Ounces) | 0.8 |
Does Ford use metric or standard sockets?
metric
Are Ford bolts metric or standard? Yes. Ford has sourced both for various vehicle over the years. While it’s a general trend that the newest cars are all metric, there are stubborn applications where older “standard” bolts are still used.
What size are the lug nuts on the 2024 Ford Bronco?
They fit your Bronco’s wheel studs to a tee but remember to apply only the appropriate torque to prevent stripping the threads. Application. This Black Factory Style 3/4-Inch M12x1. 5 Lug Nuts in Set of 24 fits all 2021-2024 Ford Bronco, Excluding Raptor Models.
What size are the lug nuts on the Ford Bronco Sasquatch?
The thread size of the lug nuts on a 2023 Bronco Sasquatch is M12x1. 5mm. Nowadays, the Ford Bronco Sasquatch lug nuts are often nakedly exposed thanks to the proliferation of alloy wheels.