What size socket for 2008 Honda Civic lug nuts?

The socket size for the lug nuts on a 2008 Honda Civic is 19mm.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

Do you need a deep socket to remove lug nuts?

Shallow 3/4 drive sockets will work but you then can end up with the breaker bar or ratchet hitting the tire or the body. I like to use a deep socket and a long handled breaker bar. Or, a long breaker bar that swivels.

How do you remove the lug nuts on a Honda Civic?

Park the car on a level surface with the parking brake on and remove the hubcap. Loosen lug nuts by turning a lug wrench counter-clockwise over each nut. Get extra leverage with a breaker bar before loosening stuck lug nuts. Use your foot or a mallet to press down on the wrench or loosen nuts with oil.

What lug size is a Honda Civic?

Therefore, if you get aftermarket wheels, you are likely to change the OEM Honda Civic lug nuts. The most common thread sizes of Honda Civic lug nuts are M12x1. 5mm.

What is the most common lug nut socket size?

Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size is a Honda lug nut?

The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.

What size socket is a Honda Civic lug nut?

What size socket are Honda Civic lug nuts? Since the lug nuts are 12mm in diameter, you’ll need a 19mm socket to remove and install them. A standard 6-point 19mm socket is the proper tool for getting Honda Civic lug nuts off and on. Make sure you’re using a quality 6-point socket, not a 12-point one.

What size lugs are on a 08 Civic?

Wheel Bolt Pattern Guide

Bolt Pattern	5×114.3 mm
Nut or Bolt	nut
Nut Bolt Thread Type	M12x1.5
Nut Bolt Hex	19
Nut or Bolt Torque	80* Please, consult your car’s user manual for exact range.

Does Honda use metric or standard?

Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.

What size socket is a Honda Civic?

A standard 6-point 19mm socket is the proper tool for getting Honda Civic lug nuts off and on. Make sure you’re using a quality 6-point socket, not a 12-point one. The points on a 6-point socket apply more force directly to the flats of the lug nut for better grip.