What size oil filter wrench for Subaru?

Oil Filter Wrench Size for Subaru
To determine the correct oil filter wrench size for a Subaru, it’s important to consider the specific filter being used. Based on the information from the search results, the size of the oil filter wrench for Subaru varies depending on the specific model and filter type. Here’s a summary of the relevant information:
– The Subaru 15208AA20A & 15208AA160 Tokyo Roki Black quality oil filters require a 66.5mm 14 flute cap wrench. However, it’s important to note that this size does not fit the old Blue OEM Fram/Honeywell 15208AA15A filters or the blue “No-Name” filters issued during a supply chain crisis.
– For the Subaru 2.5L Turbo engine, an OTC 6905 Subaru 2.5L Turbo Oil Filter Socket of precise 66.5mm size is recommended. This socket is designed to remove and replace the oil filter without the technician burning their hands and works on all 2003-current Subaru vehicles with the 2.5L Turbo engine, including the WRX and Forester models.
– Another option is the Assenmacher Specialty Tools SU8015 3/8 In Dr Subaru / Hyundai Oil Filter Wrench, which is designed for Subarus and Hyundais and has a size of 80mm with 15 flats.
– Additionally, the Plews Lubrimatic cast zinc 65-68 MM oil filter wrench is reported to fit the OEM filter on a 2007 Forester.
Based on this information, it’s clear that the oil filter wrench size for Subaru can vary depending on the specific model and filter type. It’s important to ensure that the correct size and type of wrench are used to avoid damaging the filter during removal or installation.

How many mm is a Subaru oil filter?

The Subaru factory oil filter measures 65.0mm across the opposing “flats”, and 66.25mm across the opposing “points”. This explains why, when attempting to turn filter using socket, it just spins, easily passing over the high points of the filter.

Do I need a special wrench to remove oil filter?

Your choice of tool will depend on the filter size, the amount of room you have surrounding the filter and how tightly the filter is connected. At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench.

What size socket is a Subaru oil filter?

Product information

Manufacturer	‎CTA Tools
Model	‎CTA Tools A270 Cap-Type Oil Filter Socket – 65mm x 14 Flute (Subaru)
Item Weight	‎3.84 ounces
Product Dimensions	‎3.9 x 2.4 x 2.3 inches
Country of Origin	‎Taiwan

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

What is the size of oil filter socket?

Enter our friend, the oil filter socket.
The socket typically has a regular 3/8-inch drive female coupling on top, then you simply insert your ratchet and get to work.

Do you need a special tool to remove an oil filter?

Put it on there. And start spinning. It until your filter. Comes off.

Can you change Subaru oil filter without draining oil?

One common question among car owners is whether they can change their oil filters without changing the oil. The good news is that you can absolutely change your oil filter without emptying the oil from your engine. This is because the location of the oil in your engine remains untouched during a filter change.

How do I know what oil filter wrench to buy?

This can be done by reading your car owner’s manual that specifies the oil filter diameter. Alternatively, you can also look up online for the oil filter diameter by entering the details of your car like model name/number/brand, etc.

What size is the oil socket on a Subaru Outback?

Subaru Outback Engine Oil Pan Drain Plug. Plug 16X17 – 807016210 – Genuine Subaru Part.

What size socket is a Subaru?

To remove and install Subaru lug nuts, you’ll need a 19mm socket. This fits the standard 12mm x 1.25 nuts. So the common socket sizes are: 12×1.25mm lug nuts: 19mm socket.