What size oil filter wrench for 2008 Ford Fusion?

Oil Filter Wrench Size for 2008 Ford Fusion
To determine the correct oil filter wrench size for a 2008 Ford Fusion, it’s important to consider the type of oil filter installed in the vehicle. Based on the information provided in the search results, it appears that the 2008 Ford Fusion with a 2.3 4-cylinder engine uses a canister type filter. Here are the relevant details:
– The canister type filter on the 2008 Fusion with a 2.3 4-cylinder engine can be removed using a Type B Filter Socket from Autozone, which runs for $5.99. It’s noted that this socket is a bit loose, but it works great.
– Additionally, an OTC company 15/7.5 oil wrench is mentioned as a perfect fit for the Ford Fusion. However, it’s important to verify the compatibility of this specific wrench with the 2008 Ford Fusion’s canister type filter.
– Another user mentioned using an OTC (6903) Oil Filter Socket, which precisely fit the filter on their 2007 Ford Fusion with a canister type filter. This socket is designed for Ford/Mazda vehicles and has a diameter of 75.6mm, making it suitable for the canister type filter on the Fusion.
Based on the information provided, it’s recommended to use a Type B Filter Socket from Autozone or an OTC (6903) Oil Filter Socket with a 75.6mm diameter for the canister type oil filter on the 2008 Ford Fusion with a 2.3 4-cylinder engine.
It’s important to ensure that the selected wrench or socket is compatible with the specific canister type filter installed in the vehicle to avoid any issues during the oil filter replacement process.
Always remember to verify the compatibility of the wrench or socket with the vehicle’s specific oil filter type before making a purchase.
I hope this information helps you find the right oil filter wrench for your 2008 Ford Fusion! If you have any further questions, feel free to ask!

How much oil does a 2008 Ford Fusion 4 cylinder take?

Capacity: With filter 4.5 quarts. After refill check oil level.

Where is the oil filter on a 2008 Ford Fusion?

Plug is for this car. And where you’re going to look for is your oil pan right here most cars oil pan will look similar. So that and the drain bolt will be located right here on.

How do I know what oil filter wrench to buy?

This can be done by reading your car owner’s manual that specifies the oil filter diameter. Alternatively, you can also look up online for the oil filter diameter by entering the details of your car like model name/number/brand, etc.

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

How much oil does a 08 Ford Fusion take?

Capacity: With filter 6 quarts. After refill check oil level.

Do I need a special wrench to remove oil filter?

But it still works and i’ll show. You. So i knocked a hole in it we’re gonna let that drain. Out. And there it goes.

What size socket do I need for oil plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the oil drain plug on a 2008 Ford Fusion?

Notes: Oil drain plug M12-1.75 pilot point, inset gasket slim flange.

What size is the oil drain plug on a Ford Fusion?

Head size (SAE/metric): 15 mm. Thread size: M12-1.75.

Are all oil filter wrenches the same?

As far as filter wrenches, most filters are 1 of 5 different diameters. I say that based on the number of “cap” wrenches you’ll find for filters. Otherwise, filter wrenches are adjustable. At my house, I have (2) cap wrenches – one of them fits three different cars while I needed the other to fit just one car.