Based on the search results, the recommended size for an oil filter wrench for a 2007 Toyota Sienna is 64mm. The Motivx Tools oil filter wrench is specifically mentioned as a good fit for the 64mm top ring of the oil filter housing on a 2007 Toyota Sienna. Other sources also mention the 64mm size as compatible with Toyota Sienna oil filters.
Please note that it’s always a good idea to double-check the specific requirements for your vehicle’s oil filter before making a purchase.
Contents
- Where is the oil filter on a 2007 Toyota Sienna?
- What size wrench do I need to remove an oil filter?
- Do I need a special wrench to remove oil filter?
- What tool do I need to remove oil filter?
- What size is the oil filter wrench on a 2008 Toyota Sienna?
- What size is the oil filter wrench on a 2009 Toyota Sienna?
- How big is a Toyota oil filter?
- What size is the oil filter wrench on a 2007 Toyota Camry?
- Do you need a special tool to remove Toyota oil filter?
- What is the best tool to remove an oil filter?
Where is the oil filter on a 2007 Toyota Sienna?
And our drain plug is pointed towards the back of the vehicle. So i’ll move the camera a little bit closer.
What size wrench do I need to remove an oil filter?
Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.
Do I need a special wrench to remove oil filter?
Your choice of tool will depend on the filter size, the amount of room you have surrounding the filter and how tightly the filter is connected. At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench.
What tool do I need to remove oil filter?
If the filter is too big around to get a grip on with one hand I’ll use both. I use an oil filter strap wrench though, in a pinch, I can just hammer a big screwdriver through it and twist it off with that.
What size is the oil filter wrench on a 2008 Toyota Sienna?
Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Cruiser,Avalon,Tacoma,Tundra,Highlander,Sienna-64mm 14 flute Oil Filter Cap Removal Tool.
What size is the oil filter wrench on a 2009 Toyota Sienna?
64mm 4 Slots Aluminum Oil Filter Wrench for Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna, Cruiser, Tacoma – 3/8 Inch Square.
How big is a Toyota oil filter?
Product information
| Manufacturer | Toyota |
|---|---|
| Product Dimensions | 3.5 x 2.8 x 2.5 inches |
| Item model number | 90915-YZZF1 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 90915YZZF1 |
What size is the oil filter wrench on a 2007 Toyota Camry?
64.5mm Oil Filter Wrench: Oil Filter Removal Tool Compatible with Toyota Camry RAV4 4Runner Tacoma Lexus 2005-2021, 14 Flutes 4 Slots for 2.0L-5.7L Engine.
Do you need a special tool to remove Toyota oil filter?
Toyota has provided a drain plug for you 2.5L – 5.7L owners so you can drain the filter housing prior to removing it. This can be done by removing the metal plug to expose the valve, then installing the Motivx MX2341 drain tool. Once drained, the housing can be removed using a specialty oil filter wrench.
What is the best tool to remove an oil filter?
At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench. Once you have loosened the oil filter by following the methods described below, it should be completely unscrewed by hand.
