What size lugs are on a Dodge Charger?

Dodge Charger Lug Nut Size
The lug nut size for a Dodge Charger is 21mm. While a 13/16″ socket can work, it may be a little tight and scuff the chrome on the lugs. On the other hand, a 22mm socket may be too large and feel sloppy.
The bolt pattern of a Dodge Charger is PCD 5×115, with five lugs per wheel. The lug nuts have an M14 x 1.5 thread size and a 1.5 thread pitch.
In summary, the lug nut size for a Dodge Charger is 21mm, and the bolt pattern is PCD 5×115 with an M14 x 1.5 thread size and a 1.5 thread pitch.
If you have any more questions or need further assistance, feel free to ask!

What size socket do I need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

How do I know what size my lugs are?

1. Diameter Measurement: Use a caliper or a ruler to measure the diameter of the lug bolt’s threaded portion. This measurement will give you the bolt’s diameter. Most lug bolts will have a metric diameter, typically measured in millimeters.

What size are the lug nuts on a 2017 Dodge Charger?

M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4″ and 13/16″ Hex)

How do I know my lug nut size?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.

What size are my lug bolts?

The easiest way to find both thread size and pitch is in your owner’s manual. You also can take another matching lug nut or stud to a hardware/automotive store and match it up by threading it on.

What size socket is a 2013 Dodge Charger lug nut?

14 mm x 1.50 thread size, 13/16″ hex.

Are lug nuts standard size?

There is no standard lug nut size. It could be 17,18,19,20,21,22 or even 24 mm. Or 3/4″, 15/16″, 7/8″, 13/16″. It all depends on the vehicle.

What size socket is a 2018 Dodge Charger lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

Do you need a special socket for lug nuts?

Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.

What size are the lug nuts on a Hellcat Charger?

5×34 Titanium Lug Nuts for Dodge Challenger Hellcat and Charger.