What size lug wrench for 2016 Ford Fusion?

To determine the size of the lug wrench for a 2016 Ford Fusion, we can refer to the information available from various sources.
According to a post on the Ford Fusion Forums, the lug nut size for the Fusion is 19mm. Another source, Advance Auto Parts, mentions that the lug nut size for the 2017 Ford Fusion is M12-1.50.
Based on this information, it is likely that the lug nut size for the 2016 Ford Fusion is also 19mm. Therefore, a 19mm lug wrench should be suitable for removing and installing the lug nuts on a 2016 Ford Fusion.
Please note that it is always a good idea to consult the owner’s manual or contact a Ford dealer to confirm the exact lug nut size for your specific vehicle.

What size socket is a Ford lug nut?

To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.

What size lug wrench for Ford Fusion?

5 Lug Nuts & Lug Wrench.

What size lugs are on a 2017 Ford Fusion?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size lugs are on a 2016 Ford Fusion?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex. Refer to your owner’s manual or wheel manufacturer’s guide for correct thread size, seat style, length, hex and torque specifications. Improper installation can result in accident and/or injury.

What size wrench is a 2015 Ford Fusion lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size socket do I need to remove wheel nuts?

19mm socket is what you need – locking nut and standard all the same size.

What size wrench for lug nuts on 2017 Ford Fusion?

M12 x 1.5. 13/16 Hex.

What lug bolt pattern is a 2016 Ford Fusion?

5×108
What is the bolt pattern on a Ford Fusion? The latest generation of Ford Fusion comes with a 5×108 bolt pattern, although earlier models feature a 5×114.

What is the spec of the lug nuts on a Ford Fusion?

The lug nuts hex head is 19mm (meaning you use a 19mm socket to get them off) and yes, 100 ft/lbs for the torque spec.

Are all Ford wheel nuts the same size?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.