What size lug nuts are on a Toyota Tacoma?

Toyota Tacoma Lug Nut Size
The lug nut size for a Toyota Tacoma is 21mm in diameter. This is the standard size for the lug nuts on the Tacoma, and a 21mm wrench or socket is the appropriate tool for removing and installing these lug nuts.
It’s important to use the correct size wrench or socket to avoid damaging the lug nuts. While a 13/16″ wrench may fit, it’s best to use the 21mm tool to prevent any potential stripping of the lug nuts.
If you need to purchase lug nuts for your Toyota Tacoma, you can find them at various retailers, including Amazon and auto parts stores like Advance Auto Parts [[8]].
If you’re planning to torque the lug nuts on your Toyota Tacoma, it’s essential to use a torque wrench calibrated to the correct torque specifications for your specific model year. This ensures that the lug nuts are tightened to the proper spec, which is crucial for safety and the longevity of the vehicle.

What size is Toyota lug nuts?

Thread Size: 12mm x 1.50.

Is 13 16 the same as 21mm?

21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.

What size is Tacoma lug nuts?

A Direct Replacement, Closed End ET Lug nut. 12mm x 1.50 thread size.

What size is a lug nut socket?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size are the lug nuts on a Toyota Tacoma SR5?

Specification: 12mmx1. 5 Thread Pitch, 13/16″(21mm) Hex, 1.46″(37mm) Height, 0.72″(18mm) Width, Mag Seat.

Are Tacoma bolts metric or standard?

When it comes to Toyota trucks, you only need to carry metric wrenches with you. I like to carry a variety of sizes with me just in case, but the majority of bolts on a Toyota will be 10,12,14,17,19,21mm.

What size socket do I need for lug nuts?

The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size is a Tacoma 6 lug?

All 1995 & newer Toyota Tacoma 4WD trucks share the same common 6×5. 5″ bolt pattern, also commonly referred to as 6×139. 7. All Toyota Tacoma Pre Runner trucks from 2001 and newer also share this same common 6 bolt wheel pattern.

What size are the lug nuts on a 2015 Toyota Tacoma?

M12 x 1.5. 3/4 Hex.

What size are Toyota TRD lug nuts?

Genuine Parts. This is the traditional TRD Chrome, Spline-Drive, CONICAL-SEAT lugnut with a captured conical swivel washer. It is designed for the standard 12mm x 1.5 OE thread pitch found on almost all Toyota/Scion/Lexus vehicles.