Ford Ranger Wheel Nut Size
The wheel nut size for a Ford Ranger is as follows:
– Thread Size: 1/2″-20
– Hex Size: 20.6 mm.
This information is crucial for ensuring the proper fit and safety of the wheel nuts on a Ford Ranger.
Contents
- What size impact wrench do I need to remove lug nuts?
- Do all Ford Rangers have the same bolt pattern?
- What size socket is a Ford Ranger wheel nut?
- What thread is Ford lug nuts?
- What size lug for Ford Ranger?
- What size do you have to be to remove lug nuts?
- What size socket is my lug nut?
- Are all Ford wheel nuts the same size?
- What size are the wheel nuts on a 2014 Ford Ranger?
- What size is a truck wheel nut?
What size impact wrench do I need to remove lug nuts?
1/2 inch
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
Do all Ford Rangers have the same bolt pattern?
The bolt pattern, also known as the Pitch Circle Diameter (PCD) is 6×139. 7mm or 6×5. 5in. This means the Ranger has six wheel studs on each wheel, which are spaced 139.7mm apart.
What size socket is a Ford Ranger wheel nut?
19mm
5 Qty:24 19mm Socket.
What thread is Ford lug nuts?
M14x1.5
With a thread size of M14x1. 5, the installation process is quick and straightforward.
What size lug for Ford Ranger?
They fit a 6-lug configuration (M12x1. 5″ thread) and will shine on your truck.
What size do you have to be to remove lug nuts?
For cars a 1/2 wrench is probably adequate but in the truck industry they all use 3/4 inch wrenches. If you are only working on your own car just use a 1/2 inch breaker bar and do the job by hand, and don’t over tighten the nuts, moderate pressure on the bar is adequate.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Are all Ford wheel nuts the same size?
Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.
What size are the wheel nuts on a 2014 Ford Ranger?
M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4″ Hex – Conical Seat) Crafted with precision machined threads and passed through our lengthy multi-point quality control process.
What size is a truck wheel nut?
Most common commercial lug nut size, the 33mm is used for most medium and heavy duty trucks. Compare to 1-5/16” A secondary light truck lug nut size.
