Wheel Nut Size for Ford Capri
The wheel nut size for a Ford Capri appears to be 22mm. This size is mentioned in a forum post where a user is looking to replace the nut on the steering column, which holds the steering wheel in place. The user specifically mentions that the nut is a 22mm socket and is inquiring if it’s an M14 size.
It’s important to note that the information provided is based on user experiences and may not represent official specifications. For precise information, it’s recommended to consult official Ford Capri documentation or reach out to authorized Ford service centers.
Contents
- What size socket do I need for my lug nuts?
- What size is Ford wheel nuts?
- How many Ford capris are there?
- What size is a Ford Focus wheel nut?
- What size Tyres are on a Ford Capri?
- What size is a wheel nut socket?
- What size tyres are on a 2.8 Capri?
- What size socket is a Ford lug nut?
- What size socket do I need to remove wheel nuts?
- What size are the wheel nuts on a Ford Fiesta?
What size socket do I need for my lug nuts?
4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size is Ford wheel nuts?
Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.
How many Ford capris are there?
It used the mechanical components from the Mk2 Ford Cortina and was intended as the European equivalent of the Ford Mustang. The Capri went on to be highly successful for Ford, selling nearly 1.9 million units in its lifetime.
What size is a Ford Focus wheel nut?
Ford Focus wheel nuts specs for these are: 19mm Hex head. M12 x 1.5 thread. 60 degree taper with a 28mm diameter.
What size Tyres are on a Ford Capri?
– All Ford Capri models of Mk 1 and Mk2 were fitted with tyre size 165R13 originally. This was the radial equivalent of the cross ply 6.00×13 as listed on these earlier cars. This 165R13 tyre size covered the Capri 1300, 1600GT and 2000GT models.
What size is a wheel nut socket?
Sizes: 18.5, 19.5mm single Hex (6pt) x 1/2″D x 78mm long. Thin walled sockets with protective sleeve to prevent damage to alloy wheels.
What size tyres are on a 2.8 Capri?
205/60R13
The 2.8i injection version of the 2.8 V6 Capri fitted 205/60R13, we can offer a 205/60 R 13 Vredestein in this size.
What size socket is a Ford lug nut?
To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
What size socket do I need to remove wheel nuts?
19mm socket is what you need – locking nut and standard all the same size.
What size are the wheel nuts on a Ford Fiesta?
19mm– This is the most common lug nut size on many Fiesta models encompassing 1990-2023 Fiesta, 2018-2022 Fiesta Active, Fiesta Classic and Fiesta Ikon. A 19mm six-sided socket (also called triple square) is needed to remove the wheel nuts. 14mm– Some older Fiesta models from 76-89 use a 14mm hex socket lug nut.
