Transmission Drain Plug Size for Ford Focus
The size of the transmission drain plug for a Ford Focus varies based on the model and year. According to a discussion on the Focus Fanatics Forum, the drain plug for a 2011 Focus S with a manual transmission requires a hex bit socket, and the size is either 17mm, 18mm, or 19mm. Another source mentions that the oil drain plug size is M12 x 1.75 15mm, but the transmission drain plug size is not explicitly mentioned.
It’s important to note that the specific size may vary depending on the exact model and year of the Ford Focus. Therefore, it’s recommended to consult the vehicle’s manual or reach out to a certified Ford dealership or mechanic for the most accurate information.
If you need further assistance or have any other questions, feel free to ask!
Contents
- How many quarts of transmission fluid does a Ford Focus take?
- Where is the drain plug on a 2014 Ford Focus?
- How do you drain transmission fluid without a drain plug?
- How many quarts of transmission fluid does a 2013 Ford Focus take?
- What size is the transmission drain plug on a 2014 Ford Focus?
- What size is the transmission drain plug?
- What size is the drain plug on a 2013 Ford Focus?
- How many quarts of transmission fluid does a 2003 Ford Focus take?
- How many quarts are needed for a transmission fluid change?
- What tool do I need to drain transmission fluid?
How many quarts of transmission fluid does a Ford Focus take?
1.8 quarts
Adequate quantity of fluid needed for a complete Ford Focus MTF manual transmission fluid change. 2013-2018 Ford Focus ST Manual Transmission Fluid Capacity: 1.7 liters or 1.8 quarts. 2016-2018 Ford Focus RS Manual Transmission Fluid Capacity: 1.9 liters or 2.0 quarts.
Where is the drain plug on a 2014 Ford Focus?
To do this, locate the oil pan drain plug underneath the car. On most Ford Focus models, this will be a 13mm hex bolt facing towards the car’s rear — but don’t touch it just yet. First, place an oil drain pan underneath to catch the draining oil.
How do you drain transmission fluid without a drain plug?
The trick on how to drain transmission fluid is to work from the top, sucking out the old fluid up through the filler tube. Then refill with fresh fluid. A hand-operated vacuum transmission fluid pump makes the job simple and clean. You can remove one-third to one-half of the fluid from the transmission at a time.
How many quarts of transmission fluid does a 2013 Ford Focus take?
For Automatic Transmission: DPS6….SL026
Capacity: 6 speed DPS6 Total Fill 1.9 quarts.
What size is the transmission drain plug on a 2014 Ford Focus?
plugs are a 8mm allen head bolt.
What size is the transmission drain plug?
Product Specifications
| Color: | Yellow |
|---|---|
| Thread Diameter: | 10 mm |
| Thread Type: | Coarse |
| Universal Or Specific Fit: | Specific |
| Wrench Size: | 14 mm |
What size is the drain plug on a 2013 Ford Focus?
Notes: Oil drain plug M12-1.75 pilot point, inset gasket slim flange.
How many quarts of transmission fluid does a 2003 Ford Focus take?
Automatic Transmission Fluid
Capacity: 4 speed 4F27E Total Fill 7 quarts.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
What tool do I need to drain transmission fluid?
Transmission Fluid Funnel: A specialized funnel to help pour the transmission fluid without spilling. Drain Pan: To collect and dispose of the old fluid. Socket Set: Useful for removing the transmission drain plug. Torque Wrench: Ensures bolts are tightened to the manufacturer’s specifications.
