The rear end size of a Dodge Dakota can vary depending on the model year. According to the search results, the early Dakota models (pre-1997) have an 8.25″ rear end, while the later models have a 9.25″ rear end. It’s important to note that the bolt pattern also varies depending on the model year. The early Dakota models have a 4.5″ bolt pattern, while the later models have a 6 bolt pattern or a 5 on 5.5″ bolt pattern.
Contents
- How do I know my axle size?
- What is the difference between a 4.10 and 3.73 rear end?
- What size is a rear axle?
- What trucks have Dana 60 rear axles?
- What is the rear end ratio of a 2005 Dodge Dakota?
- What rear axle is in a 2000 Dodge Dakota?
- What rear end is in a 2000 Dodge 3500?
- What is the gear ratio for the rear end of a 2003 Dodge Dakota?
- What size is my rear differential?
- How do I know what rear end my truck has?
How do I know my axle size?
Usually this is located on the driver’s side of the trailer. Another way we can determine which axle we need is by measuring the diameter of the axle.
What is the difference between a 4.10 and 3.73 rear end?
What is the difference between a 3.73 and a 4.10 axle ratio? 4.10 gears will give you more toque for pulling at lower speeds, as it is lower geared, but it does cost you in fuel efficiency. I prefer 3.73, as it gives plenty of torque for pulling, but doesn’t cost you as much fuel mileage.
What size is a rear axle?
Axle diameters of 15 millimetres at the front and 12 millimetres at the rear have become the established standards. On older bikes with a lot of suspension travel, 20-millimetre axles were sometimes installed at the front. Today, two axle diameters dominate the market, whether boost or non-Boost.
What trucks have Dana 60 rear axles?
- 1964–1977 Chevrolet and GMC 3/4-ton pickups.
- 1975–1987 Chevrolet and GMC 1-ton pickups and Suburbans.
- 1979–2012 Chevrolet and GMC 1-ton vans.
- 2002–2005 Chevrolet and GMC 1/2 + 3/4 Ton pickups and Suburbans with Quadrasteer.
What is the rear end ratio of a 2005 Dodge Dakota?
My 2005 Dodge Dakota has a 3.7L V6, 42RLE transmission, and 3.55 diff ratio.
What rear axle is in a 2000 Dodge Dakota?
Revolution Gear and Axle Rear axle shaft for Chrysler / Dodge 9.25 Inch 97-04 Dakota and Durango, Left Hand, 33.38 Inch 31 Spline (OE# 52069389 / Hollander# 447-2344L). Revolution replacement series axles are made from 1541H Steel and utilize a state of the art computer controlled heat treated process.
What rear end is in a 2000 Dodge 3500?
For the 2000-2002 model years, Dodge used the Dana 80 rear axle for all Ram 2500 models with either a Cummins Diesel or V10 gas engine and a manual transmission. All 2000-2002 Ram 3500 trucks use the Dana 80 rear axle.
What is the gear ratio for the rear end of a 2003 Dodge Dakota?
This rear diff is configured with a 3.55 or 3.92 gear ratios, and a Limited Slip differential, depending on the stock configuration of your Dodge Dakota.
What size is my rear differential?
Check the Differential Cover
The axle may have a sticker, and on the differential cover, you might have a small metal tag that’s sticking out that will have the gear ratio stamped on it.
How do I know what rear end my truck has?
Visual Differential Identification
Without an ID tag, differentials are identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
