Rear Axle Size of Toyota Tundra
The rear axle size of a Toyota Tundra can vary depending on the specific model and year. Unfortunately, the search results did not provide a direct answer to the specific rear axle size of the Toyota Tundra. Therefore, I don’t have the exact dimensions of the rear axle for the Toyota Tundra based on the provided search results.
If you have access to the vehicle, you may be able to find the rear axle size by physically measuring it. Alternatively, contacting a Toyota dealership or a certified mechanic may also provide the specific rear axle size for your Toyota Tundra.
If you have any other questions or need further assistance, feel free to ask!
Contents
- What is the diameter of the Tundra axle tube?
- What size axle does my truck have?
- What is the rear axle ratio on a tundra?
- What size socket fits a Toyota axle nut?
- What size socket do I need to remove an axle nut?
- How do I know what size rear axle I have?
- What size socket is the axle nut on a Toyota Tundra?
- What size is a rear axle?
- What kind of rear axle do I have?
- How do I identify my Toyota differential?
What is the diameter of the Tundra axle tube?
Re: Tundra Axle
Indeed, 36 spline axles,with an outside diameter of 1.457 nches comparable in strength to 14 bolt or Dana 70, so says the august edition of 4wheel and off road.
What size axle does my truck have?
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
What is the rear axle ratio on a tundra?
3.31
With the Double Cab, 4×4 drivetrain, its 7,265-pound GVWR, the same 145.7-inch wheelbase, and the same 3.31 rear axle ratio, its maximum towing capacity is an equally astounding 8,300 pounds when properly equipped.
What size socket fits a Toyota axle nut?
The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16″ 12 point.
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
How do I know what size rear axle I have?
To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle’s towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as “Limited Slip.”
What size socket is the axle nut on a Toyota Tundra?
I searched and got an answer of 39mm 12 point.
What size is a rear axle?
Axle diameters of 15 millimetres at the front and 12 millimetres at the rear have become the established standards. On older bikes with a lot of suspension travel, 20-millimetre axles were sometimes installed at the front. Today, two axle diameters dominate the market, whether boost or non-Boost.
What kind of rear axle do I have?
Mark the wheel and the drive shaft with chalk or masking tape. Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio.
How do I identify my Toyota differential?
If the ID tag or stamp is missing or unreadable, differentials can be identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
