Rear Axle Size of Toyota FJ Cruiser
The rear axle size of a Toyota FJ Cruiser is 60.75 inches.
Contents
- How do I know what size rear axle I have?
- How do you measure axle size?
- What are the wheel axle sizes?
- What does Fj stand for?
- How much is an FJ40 worth?
- How do I identify my Toyota differential?
- What size is a rear axle?
- What is the width of the rear axle on the FJ40?
- What is the diameter of the axle on the FJ40?
- How do I know if I have 8.8 or 9.75 rear end?
How do I know what size rear axle I have?
To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle’s towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as “Limited Slip.”
How do you measure axle size?
It’s best to remove your tire assemblies off your axles when measuring your hub face. Hook your tape measure on the outside of the hub where your rim touches your hub. Measure across your axle to the exact same spot on the other side. Do not measure to the back side of your hub.
What are the wheel axle sizes?
The most common front thru axle OLD dimensions are 100 mm, 110 mm, and 150 mm for front axles and 130mm, 135mm, 142mm, 148mm, and 197mm for rear axles. To accommodate both OLD sizes and dropout sizes, there are over 40 different thru-axle lengths on the market today.
What does Fj stand for?
FJ stood for F=engine type. J actually. stood for Jeep! After WW2 The US.
How much is an FJ40 worth?
A: The average price of a Toyota Land Cruiser FJ40 is $37,615.
How do I identify my Toyota differential?
If the ID tag or stamp is missing or unreadable, differentials can be identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
What size is a rear axle?
Axle diameters of 15 millimetres at the front and 12 millimetres at the rear have become the established standards. On older bikes with a lot of suspension travel, 20-millimetre axles were sometimes installed at the front. Today, two axle diameters dominate the market, whether boost or non-Boost.
What is the width of the rear axle on the FJ40?
Toyota Axle Widths
Vehicle models | Front or Rear | SPC to SPC |
---|---|---|
Toyota Tacoma and 4Runner | Rear axle | |
Toyota Land Cruiser FJ40/FJ45/FJ55 | Front axle | 27.2″ |
Rear axle | 38.5″ | |
Toyota Land Cruiser FJ60 and FJ62 | Front axle | 31.6″ |
What is the diameter of the axle on the FJ40?
The rear axle diameters on a FJ40 are 1.31″ diameter and 30 spline.
How do I know if I have 8.8 or 9.75 rear end?
On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.