Oil Socket Size for Subaru Forester
The oil drain plug in a Subaru Forester typically requires a 14mm or 17mm wrench, depending on the year of the model. The thread size of the oil drain plug is M20-1.50, and it has a head size of 17mm.
So, the oil socket size for a Subaru Forester can be either 14mm or 17mm, depending on the specific year of the model.
If you need further assistance or have any other questions, feel free to ask!
Contents
- What wrench to use for oil change?
- What size is the oil drain plug on a Subaru?
- What size is the oil drain plug on a Subaru Forester?
- What size ratchet do I need for oil change?
- What size is Subaru oil drain plug?
- What size are the nuts on a Subaru Forester?
- What size socket for Subaru plugs?
- What size socket do I need for oil plug?
- What size socket do I need to remove the oil?
- What size is the oil change nut on a Subaru?
What wrench to use for oil change?
Wrench. The most common tool used when changing motor oil is the combination wrench. This kind of wrench has both an open side and a closed side. The open end can be used to remove the wrench and position it on the nut.
What size is the oil drain plug on a Subaru?
16X17
Subaru Outback Engine Oil Pan Drain Plug. Plug 16X17 – 807016210 – Genuine Subaru Part.
What size is the oil drain plug on a Subaru Forester?
Subaru Forester Engine Oil Pan Drain Plug. Plug 16X17 – 807016210 – Genuine Subaru Part.
What size ratchet do I need for oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you’re starting out, a 3/8” drive should do just fine.
What size is Subaru oil drain plug?
16X17
Plug 16X17 – Genuine Subaru Part.
What size are the nuts on a Subaru Forester?
Notes: Nut. 12 mm x 1.25 thread size, 3/4″ and 13/16″ hex.
What size socket for Subaru plugs?
5. Remove The Spark Plugs. With a 14mm spark plug socket and short extension, remove the spark plugs.
What size socket do I need for oil plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket do I need to remove the oil?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
What size is the oil change nut on a Subaru?
Oil Drain Plug M16-1.50, Head Size 17Mm Compatible With Subaru.
