What size is the oil pan bolt on a Honda Civic?

Oil Pan Bolt Size for Honda Civic
The oil pan bolt size for a Honda Civic is M14 x 1.50 with a 17mm head.
When performing an oil change on the Honda Civic, it’s important to ensure that the vehicle has been parked and off for a couple of hours. This is to prevent any burns from the hot oil in the car. The oil pan drain plug should be located on the underside of the engine compartment, and a bucket should be positioned under the plug before removing it to allow the oil to drain into the pan. After filling the oil pan, it’s crucial not to overfill it to avoid leaks and oil burn off.
In case of a lost oil pan cover bolt, it’s suggested to use a M6x1 bolt, which is fairly common and can be found at hardware stores.
It’s important to note that the original drain plug may have a 17mm head but the thread diameter and crush washer diameter are 14mm. Some Honda dealerships have replaced the old 17mm drain plug with a new 14mm drain plug during oil changes.
In summary, the oil pan bolt size for a Honda Civic is M14 x 1.50 with a 17mm head, and in case of a lost oil pan cover bolt, a M6x1 bolt is suggested.

What size is the oil drain bolt on a 2015 Honda Civic?

Oil it takes 3.9 quarts of it.

What size is Honda Civic oil drain plug?

The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself.

What size socket is the oil drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size is the oil nut on a Honda Civic?

5 Oil Drain Plugs M14-1.5 17mm Hex Compatible with Acura & Honda.

What size is the oil pan drain plug on a 2010 Honda Civic?

Notes: Oil drain plug M14-1.5.

What size is the oil plug on a Honda Civic?

Accufit – Oil Drain Plug, M14 x 1.5 (Part No. ODP-00007B)

What size is the oil pan bolt on a 2012 Honda Civic?

Notes: AutoGrade – (Carded), M14 x 1.50 Thread size.

What size socket do I need for the oil pan bolt?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the oil pan bolt on a Honda Accord?

All plugs have 14mm hex – just one wrench works for all.

What is the common oil drain plug size?

1 Answer. According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head. If a 15mm wrench is not fitting onto it, get a new drain plug, then get the old one off using whatever method which will work (short of breaking something you still need!).