AHG Auto Service » Make » Toyota » What size is the oil filter wrench on a Toyota Tundra?

What size is the oil filter wrench on a Toyota Tundra?

The oil filter wrench size for a Toyota Tundra is 64mm.

What size is the oil filter wrench on a 5.7 Toyota Tundra?

64mm
Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More – 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool.

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

How big is a Toyota oil filter?

Product information

Manufacturer ‎Toyota
Product Dimensions 3.5 x 2.8 x 2.5 inches
Item model number ‎90915-YZZF1
Is Discontinued By Manufacturer ‎No
Manufacturer Part Number ‎90915YZZF1

What size is the oil filter wrench on a 2018 Toyota Tundra?

64.3mm 14
64.3mm 14 Flute Wrench
This wrench fits oil filters with 14 flutes and an approximate diameter of 64.3mm.

What tool do I need to remove oil filter?

If the filter is too big around to get a grip on with one hand I’ll use both. I use an oil filter strap wrench though, in a pinch, I can just hammer a big screwdriver through it and twist it off with that.

What can you use instead of a filter wrench?

You can remove an oil filter either by hand, using a belt strap wrench, or improvise using a bandana. Other alternatives include using a hammer and screwdriver or using a pry bar. There are several reasons why you may need to remove an oil filter without a wrench. The most common reason is to avoid expenses.

Do you need a special tool to remove Toyota oil filter?

Toyota has provided a drain plug for you 2.5L – 5.7L owners so you can drain the filter housing prior to removing it. This can be done by removing the metal plug to expose the valve, then installing the Motivx MX2341 drain tool. Once drained, the housing can be removed using a specialty oil filter wrench.

How do you remove a Tundra oil filter without a tool?

Or you don’t or a wrench or you don’t have the means to one or it’s not big enough you could always use your belt. And put it around your oil filter like this. So it’s round and what I do is I grab

What is the best tool to remove an oil filter?

At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench. Once you have loosened the oil filter by following the methods described below, it should be completely unscrewed by hand.

Do I need a special wrench to remove oil filter?

Your choice of tool will depend on the filter size, the amount of room you have surrounding the filter and how tightly the filter is connected. At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment