AHG Auto Service » Make » Toyota » What size is the oil filter wrench on a 2013 Toyota Sienna?

What size is the oil filter wrench on a 2013 Toyota Sienna?

The oil filter wrench size for a 2013 Toyota Sienna is 64mm [[9]].

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

Do I need a special wrench to remove oil filter?

Your choice of tool will depend on the filter size, the amount of room you have surrounding the filter and how tightly the filter is connected. At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench.

What tool do I need to remove oil filter?

If the filter is too big around to get a grip on with one hand I’ll use both. I use an oil filter strap wrench though, in a pinch, I can just hammer a big screwdriver through it and twist it off with that.

Do you need a special tool to remove Toyota oil filter?

Toyota has provided a drain plug for you 2.5L – 5.7L owners so you can drain the filter housing prior to removing it. This can be done by removing the metal plug to expose the valve, then installing the Motivx MX2341 drain tool. Once drained, the housing can be removed using a specialty oil filter wrench.

What size socket wrench do I need to change my oil?

Get a set that includes some metric and SAE sizes, and if you’re starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives.

What size is the oil filter wrench on a 2008 Toyota Sienna?

64mm 4 Slots Aluminum Oil Filter Wrench for Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna, Cruiser, Tacoma – 3/8 Inch Square.

How do I know the size of my oil filter?

The manufacturer will tell you in your owner’s manual what type of filter you need, so all you need to do is match it up.

What size is the oil filter wrench on a 2013 Toyota Camry?

64.5mm

Oil Filter Wrench for Toyota Lexus
Contents Oil filter wrench x 1
Oil Filter Wrench Sizes 64.5mm (14fluts, 4 slots)
Torquing Way 3/8-inch drive ratchet (or 27mm socket)
Applications Toyota (Camry, RAV4, Tacoma, Highlander, Sienna, Tundra), Lexus, Scion

What size is an oil wrench for a 2011 Toyota Sienna?

64mm
Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Cruiser,Avalon,Tacoma,Tundra,Highlander,Sienna-64mm 14 flute Oil Filter Cap Removal Tool.

How big is a Toyota oil filter?

Product information

Manufacturer ‎Toyota
Product Dimensions 3.5 x 2.8 x 2.5 inches
Item model number ‎90915-YZZF1
Is Discontinued By Manufacturer ‎No
Manufacturer Part Number ‎90915YZZF1
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment