Based on the search results, the size of the oil filter cap wrench for a Subaru can vary depending on the specific model and year of the vehicle. Here are some relevant findings:
– The 66.5mm 14 flute cap wrench fits the new Subaru 15208AA20A & 15208AA160 Tokyo Roki Black quality oil filters.
– The 79.2mm 15 flute oil filter wrench fits select Toyota & Subaru spin-on oil filters.
– The 65mm x 14 Flute cap-type oil filter socket wrench is compatible with Subaru filters such as 15208AA12A and 15208AA15A.
– The 67mm cap wrench fits the black Subaru engine oil filters with part number ending in A100, while the blue ones are 65mm.
– The 14 flute oil filter cap wrench is designed specifically for Subaru OEM oil filters.
It’s important to note that the size may vary depending on the specific filter and model year, so it’s recommended to double-check the size of the oil filter cap wrench for your particular Subaru model.
Contents
- What size wrench do I need to remove an oil filter?
- How many mm is a Subaru oil filter?
- Are all oil caps the same size?
- What size socket is the oil filter on a Subaru Outback?
- What size is the cap wrench on a Subaru oil filter?
- Do I need a special wrench to remove oil filter?
- What size socket is a Subaru?
- What tool do I need to remove oil filter?
- What is the size of oil filter socket?
- How tight should a Subaru oil filter be?
What size wrench do I need to remove an oil filter?
Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.
How many mm is a Subaru oil filter?
The Subaru factory oil filter measures 65.0mm across the opposing “flats”, and 66.25mm across the opposing “points”. This explains why, when attempting to turn filter using socket, it just spins, easily passing over the high points of the filter.
Are all oil caps the same size?
Oil cap size varies between models of each make, and can even be different among the same models made at different times. We do not yet have a complete list of oil cap fitment, so you might want to measure the thread pitch and size of your stock oil cap before placing an order.
What size socket is the oil filter on a Subaru Outback?
65mm x 14 Flute
Amazon.com: CTA Tools A270 Cap-Type Oil Filter Socket, 65mm x 14 Flute – Compatible with Subaru : Automotive.
What size is the cap wrench on a Subaru oil filter?
A270 – Cap Type Oil Filter Wrench – 65mm x 14 Flute (SUBARU)
Do I need a special wrench to remove oil filter?
Your choice of tool will depend on the filter size, the amount of room you have surrounding the filter and how tightly the filter is connected. At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench.
What size socket is a Subaru?
To remove and install Subaru lug nuts, you’ll need a 19mm socket. This fits the standard 12mm x 1.25 nuts. So the common socket sizes are: 12×1.25mm lug nuts: 19mm socket.
What tool do I need to remove oil filter?
If the filter is too big around to get a grip on with one hand I’ll use both. I use an oil filter strap wrench though, in a pinch, I can just hammer a big screwdriver through it and twist it off with that.
What is the size of oil filter socket?
Enter our friend, the oil filter socket.
The socket typically has a regular 3/8-inch drive female coupling on top, then you simply insert your ratchet and get to work.
How tight should a Subaru oil filter be?
Purolator for Buick: 3/4 to 1 turn. Toyota for Scion xB: 1 turn. Subaru (black) for Forester: 3/4 turn. It is good to know that the new Subaru (blue) filters are supposed to be tightened as hard as you can by hand until they stop metal to metal.