AHG Auto Service » Make » Toyota » What size is the oil drain plug on a Toyota C-HR?

What size is the oil drain plug on a Toyota C-HR?

Oil Drain Plug Size for Toyota C-HR
The oil drain plug size for a Toyota C-HR is 14mm. This is the standard size used for the oil drain plug on this vehicle.
It’s important to note that oil drain plugs are not universal and come in various shapes and sizes, so it’s crucial to use the correct size for your specific vehicle to ensure proper maintenance and longevity.

What size is the Toyota engine oil drain plug?

It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.

What size socket is my oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

Do all cars have the same size oil drain plug?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.

What size socket is an oil plug Toyota Corolla?

All plugs have 14mm hex – just one wrench works for all.

What size is Prius drain plug?

Dorman Engine Oil Drain Plug 65263
Head size (SAE/metric): 14 mm.

What size is the oil drain plug on a 2017 Prius?

Use 14mm wrench for drain plug. Careful – oil comes out hot!

What size drain plug do I need?

Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.

What size is the oil drain plug on a Toyota chr?

14 mm
Dorman Engine Oil Drain Plug 65263
Head size (SAE/metric): 14 mm. Shank length: 0.472″.

What size is the oil drain plug on a Prius C?

M12 x 1.25
Accufit – Oil Drain Plug, M12 x 1.25 (Part No. ODP-00011B)

How much oil does a Toyota Chr take?

4.4 quarts
A Toyota C-HR takes 4.4 quarts of oil. How much oil you should use depends considerably on the type of vehicle, engine size, and type of oil.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment