The size of the oil drain plug on a Toyota can vary depending on the specific model and year. However, based on the search results, it seems that the most common size for the oil drain plug on Toyota vehicles is M12 x 1.25 . It is important to note that this information may not be applicable to all Toyota models, so it is always recommended to consult the vehicle’s owner’s manual or contact a Toyota dealership for the specific size of the oil drain plug for a particular vehicle.
Contents
- Are all oil drain plugs the same?
- What size socket is an oil plug Toyota Corolla?
- Do all cars have the same size oil drain plug?
- What size socket is the oil drain plug?
- What size is the oil drain bolt on a Toyota Camry?
- What can I use instead of a drain plug wrench?
- What size is the drain bolt on a Toyota Camry?
- What size wrench for Toyota Corolla drain plug?
- What size is the oil socket on a Toyota?
- What size is the oil plug on a Toyota Camry?
Are all oil drain plugs the same?
Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan. Here’s what you need to know about oil drain plugs and gaskets so you can select the right replacements.
What size socket is an oil plug Toyota Corolla?
All plugs have 14mm hex – just one wrench works for all.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil drain bolt on a Toyota Camry?
For Toyota Camry/Corolla 2013-2021 Engine Oil Drain Plug | Head Size 13mm | Pilot Point M12-1.25 | Silver | Steel | Replacement For 09247-12101, 11128-01M00.
What can I use instead of a drain plug wrench?
needle-nose locking pliers
The best substitute for a plug wrench is a set of needle-nose locking pliers. The pliers need to be small enough to reach into the drain and through the cross. Once the locking pliers are secured, you use a pair of standard pliers to turn the locking pliers and loosen the drain.
What size is the drain bolt on a Toyota Camry?
Dorman 090-038 Oil Drain Plug Standard M12-1.25, Head Size 14Mm for Specific Models (Pack of 5) Fits select: 2004-2023 TOYOTA RAV4, 2004-2023 TOYOTA CAMRY.
What size wrench for Toyota Corolla drain plug?
Engine Oil and Filter Change
After warming up the engine safely situate the vehicle so that you can access the drain bolt and oil filter housing. Place the drain pan beneath the engine and use the 14mm wrench or socket to remove the drain bolt and let drain.
What size is the oil socket on a Toyota?
64.3mm 14 Flute Oil Filter Wrench – Fits Toyota, Lexus and Scion.
What size is the oil plug on a Toyota Camry?
Head size (SAE/metric): 14 mm. Shank length: 0.472″. Thread size: M12-1.25.
