What size is the oil drain plug on a Lexus IS300?

Oil Drain Plug Size for Lexus IS300
The oil drain plug size for a Lexus IS300 is 14 mm. This information is based on the search result from ‘Lexus IS300 Oil Drain Plug – Best Oil Drain Plug Parts for Lexus IS300’.

How much oil does a is300 take?

Capacity: With filter 5.7 quarts. After refill check oil level.

Are all oil drain plugs the same?

Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan. Here’s what you need to know about oil drain plugs and gaskets so you can select the right replacements.

How much horsepower does a IS300 engine have?

241 hp
The least expensive IS remains the IS300, the numbers denoting a 2.0-liter turbo-4 that churns out 241 hp and 258 lb-ft of torque. It’s capable of 6.9-second 0-60 mph times. An 8-speed automatic is standard, as is rear-wheel drive. All-wheel drive is optional.

Do all cars have the same size oil drain plug?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.

How often does Lexus IS300 need oil change?

It’s also important to note that vehicles that run on non-synthetic oil should aim for a change around the 10,000-mile mark or prior to reaching 15,000 miles. Getting an oil change every 5,000 miles will keep the engine lubricated and running smoothly.

What size is the oil drain plug on a Lexus IS250?

For Lexus IS250 2012 2013 2014 2015 Engine Oil Drain Plug | Head Size 13mm | Pilot Point M12-1.25 | Silver | Steel | Replacement For 09247-12101, 11128-01M00.

What size is the Toyota engine oil drain plug?

It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.

What size socket is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the oil drain plug on a 2002 Lexus is300?

Accufit – Oil Drain Plug, M12 x 1.25 (Part No. ODP-00011B)

What size is the oil drain plug on a Lexus is350?

Next, locate the drain plug. It’s a about a foot further toward the rear of the car. Position your oil reservoir below the drain plug. Using your 3/8″ ratchet and 14mm socket loosen and remove the drain plug letting the oil drain into the oil reservoir.