Oil Drain Plug Size for Honda CR-V
The oil drain plug size for the Honda CR-V is a 16mm Head, with a thread size of M14-1.50. The torque for the drain plug is 30 ft/lbs. It’s recommended to use a torque wrench to set the correct torque and to install a new washer on the drain bolt whenever changing the oil.
If you have any more questions or need further assistance, feel free to ask!
Contents
- Do all cars have the same size oil drain plug?
- What size socket for a Honda CRV oil plug?
- What size is the oil drain plug on a Honda?
- What size is the oil drain plug on a 2013 Honda CRV?
- What size is the drain plug on a 2015 Honda CRV?
- What tool should you use to loosen the oil pan drain plug?
- What size is Honda oil drain bolt?
- What size is the oil drain bolt on a 2018 Honda CRV?
- What size is the drain plug on a 2016 Honda CRV?
- What size socket is the oil drain plug?
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size socket for a Honda CRV oil plug?
The back portion of the drain pan should be pointed towards the rear of the vehicle. This is done to catch the oil flowing from the oil drain hole once it is removed. Take the 17mm wrench or socket-ratchet and turn the engine oil drain bolt (Figure 9) counterclockwise.
What size is the oil drain plug on a Honda?
The plug size is 14mm but the head size is 17mm.
What size is the oil drain plug on a 2013 Honda CRV?
Remove the drain bolt with a 17mm socket wrench, and completely drain the oil.
What size is the drain plug on a 2015 Honda CRV?
The drain plug size for the 2015 Honda CR-V is a 16mm Head, 0.857 Inch Shank Length and a thread size of M14-1.50. The torque for the drain plug for the vehicle iS30 ft/lbs. To get the right torque for the drain plug, You should use a torque wrench and You will be able to set the correct torque.
What tool should you use to loosen the oil pan drain plug?
It. So we’re going to put our closed in wrench on it first because that provides a better purchase.
What size is Honda oil drain bolt?
The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours.
What size is the oil drain bolt on a 2018 Honda CRV?
M14-1.5
Notes: Oil drain plug M14-1.5.
What size is the drain plug on a 2016 Honda CRV?
Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
