What size is the oil drain plug on a Honda CR-V?

Oil Drain Plug Size for Honda CR-V
The oil drain plug size for the Honda CR-V varies depending on the model year. For the 2015 Honda CR-V, the drain plug size is a 16mm head, 0.857-inch shank length, and a thread size of M14-1.50. The torque for the drain plug for this vehicle is 30 ft/lbs. It’s recommended to use a torque wrench to set the correct torque, and when changing the oil, it’s important to install a new washer on the drain bolt.
For the 2008 Accord with a 2.4L engine, the drain plug size is 17mm. However, it’s important to note that the drain plug size may vary for different model years and engine types.
When changing the oil in a Honda CR-V, it’s crucial to ensure that the drain plug and the oil pan are in good condition to prevent leaks and damage. Reusing the crush washer multiple times may lead to it becoming flat, potentially causing issues with the oil pan.
It’s essential to use the correct drain plug size and torque specifications to maintain the integrity of the oil pan and prevent oil leaks.
If you have a specific model year in mind, please let me know, and I can provide more detailed information.

What size is the drain plug on a 2016 Honda CRV?

Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.

What size socket for a Honda CRV oil plug?

The back portion of the drain pan should be pointed towards the rear of the vehicle. This is done to catch the oil flowing from the oil drain hole once it is removed. Take the 17mm wrench or socket-ratchet and turn the engine oil drain bolt (Figure 9) counterclockwise.

What size socket is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the drain plug on a 2015 Honda CRV?

The drain plug size for the 2015 Honda CR-V is a 16mm Head, 0.857 Inch Shank Length and a thread size of M14-1.50. The torque for the drain plug for the vehicle iS30 ft/lbs. To get the right torque for the drain plug, You should use a torque wrench and You will be able to set the correct torque.

What size is the oil drain bolt on a 2018 Honda CRV?

M14-1.5
Notes: Oil drain plug M14-1.5.

What size is the oil drain plug on a 2013 Honda CRV?

Remove the drain bolt with a 17mm socket wrench, and completely drain the oil.

Do all cars have the same size oil drain plug?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.

What size is Honda oil drain bolt?

The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours.

What tool should you use to loosen the oil pan drain plug?

It. So we’re going to put our closed in wrench on it first because that provides a better purchase.

What size is the oil drain plug on a Honda?

The plug size is 14mm but the head size is 17mm.