What size is the oil drain plug on a Ford Ranger?

Oil Drain Plug Size for Ford Ranger
The oil drain plug size for a Ford Ranger is M12 x 1.75 with a 15mm head size.
This information is based on the search results from various sources related to Ford Ranger oil drain plugs.

What size socket is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

Where is the oil drain plug on a 1998 Ford Ranger?

The truck there we go. Here we are underneath ruby the ranger on the oil pan of the passenger. Side this is where the oil plug is then on the driver’s.

Where is the drain plug on a Ford Ranger?

As well as the oil filter. Right up there they’re both in the same spot. So let’s get a collection bucket. And start draining. Use a 13-millimeter socket break this free it shouldn’t be too tight.

How much oil does a 2.3 L Ford Ranger take?

6.2 quarts
With filter 6.2 quarts. After refill check oil level.

Do all cars have the same size oil drain plug?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.

What size is oil drain screw?

Oil Drain Plug Standard 7/8-16, Head Size 1-1/8 In.

How much oil does a 3.0 v6 Ford Ranger take?

4.5 quarts
Capacity: With filter 4.5 quarts. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.

What size is the oil drain plug on a 2000 Ford Ranger?

Notes: M12 x 1.75 thread. carded. With 15 mm Head. 1.06″ length.

How many quarts of oil does a Ford Ranger take?

6.2 quarts
Oil Grade: SEO89

Viscosity:	Above -20 F .5W-30
Capacity:	With filter 6.2 quarts. After refill check oil level.
Torque:	Oil Drain Plug…20 ft/lbs

Where is the oil drain plug on a 1999 Ford Ranger?

Your oil pan is located here with the drain plug over on the passenger. Side remove this with a 13 mm socket. And Ratchet be sure you have a drain bucket set up underneath. The vehicle.