Oil Drain Plug Size for a 2018 Toyota Highlander
The oil drain plug size for a 2018 Toyota Highlander is M12 x 1.25. This information was obtained from a discussion on the Toyota Nation Forum, where a user specifically mentioned the size and threading for the oil drain plug on a 2018 Highlander SE (V6, AWD).
Additionally, it’s important to note that the length of the drain plug was not explicitly mentioned in the search results. Therefore, it’s recommended to consult the vehicle’s manual or a certified mechanic for the exact length of the oil drain plug to ensure a proper fit.
If you have any further questions or need additional assistance, feel free to ask!
Contents
- What size socket is the oil drain plug?
- How much oil does a 2018 Toyota Highlander 3.5 take?
- How many quarts of oil does a 2018 Highlander take?
- Do all cars have the same size oil drain plug?
- Where is the oil drain plug on a Toyota Highlander?
- What tool should you use to loosen the oil pan drain plug?
- What size is the drain plug on a 2018 Toyota Highlander?
- What size is the oil drain plug on a 2018 Toyota Camry?
- How much oil does a 3.5 L v6 Toyota Highlander take?
- What size is the Toyota engine oil drain plug?
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
How much oil does a 2018 Toyota Highlander 3.5 take?
5.8 quarts
Capacity: With filter 5.8 quarts. After refill check oil level.
How many quarts of oil does a 2018 Highlander take?
A 2018 Toyota Highlander takes 6.4 quarts of oil. How much oil you should use depends considerably on the type of vehicle, engine size, and type of oil.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
Where is the oil drain plug on a Toyota Highlander?
Alright so we’ll move down underneath the vehicle on the passenger side you can see the oil drain bolt here which is 14 millimeter and then the oil filter housing here.
What tool should you use to loosen the oil pan drain plug?
It. So we’re going to put our closed in wrench on it first because that provides a better purchase.
What size is the drain plug on a 2018 Toyota Highlander?
Dorman – Pilot Point Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head (Sold by each) (Part No. 090-049)
What size is the oil drain plug on a 2018 Toyota Camry?
For Toyota Camry/Corolla 2013-2021 Engine Oil Drain Plug | Head Size 13mm | Pilot Point M12-1.25 | Silver | Steel | Replacement For 09247-12101, 11128-01M00.
How much oil does a 3.5 L v6 Toyota Highlander take?
5.8 quarts
Oil Grade: API*
| Viscosity: | All TEMPS….0W-20 – 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | With filter 5.8 quarts. After refill check oil level. |
What size is the Toyota engine oil drain plug?
It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.
