Oil Drain Plug Size for a 2011 Ford Taurus
The oil drain plug size for a 2011 Ford Taurus is M12-1.75 with a head size of 15mm.
This information is based on the search results provided, specifically from a source that specifies the thread size and head size for the oil drain plug of a 2002 Ford Taurus, which is likely to be the same for the 2011 model.
Contents
- Where is the drain plug on a Ford Taurus?
- How much oil does a 3.5 L Ford Taurus take?
- Which plug is used to drain engine oil?
- How many quarts of oil does a 3.5 L V6 take?
- Where is the oil plug on a 2011 Ford Taurus?
- What size is the oil drain plug on a 2013 Ford Taurus?
- What size is oil drain screw?
- What size socket is the oil drain plug?
- Do all cars have the same size oil drain plug?
- How much oil does a 2011 Ford Taurus 3.5 take?
Where is the drain plug on a Ford Taurus?
The drain bolt is the lowest bolt on the oil pan and is facing towards the rear of the vehicle. Inspect the drain bolt O-ring for any tears and then tighten. Locate the oil filter just in front of the drain bolt. Remove the oil filter using an oil filter socket or pliers and let drain.
How much oil does a 3.5 L Ford Taurus take?
Capacity: With filter 6 quarts. After refill check oil level.
Which plug is used to drain engine oil?
The sump plug is the metal bolt at the bottom of the sump which, when removed, allows you to drain off the engine’s oil, and is sometimes called sump drain plug. Replacing the drain plug and seal when doing an oil change is good practice.
How many quarts of oil does a 3.5 L V6 take?
6.0 qt
Capacities and Specifications – 3.5L Ecoboost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 13.1 qt (12.4 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear axle fluid (four-wheel drive) | 2.11 pt (1.0 L) |
Where is the oil plug on a 2011 Ford Taurus?
So the drain plug is 15 millimeter right Lu’s not the drain plug you want to get your oil.
What size is the oil drain plug on a 2013 Ford Taurus?
Engine Oil Pan Drain Plug – M12 X 1.75. FordUS.
What size is oil drain screw?
Oil Drain Plug Standard 7/8-16, Head Size 1-1/8 In.
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
How much oil does a 2011 Ford Taurus 3.5 take?
5.5 quarts
Capacity: With filter 5.5 quarts. After refill check oil level.
