The oil drain plug size for a 2007 Toyota Corolla is M12-1.25. The head size of the plug is 13 mm.
Contents
- How much oil does a 2007 Toyota Corolla 1.8 take?
- Do all cars have the same size oil drain plug?
- What size is the oil filter wrench on a 2006 Toyota Corolla?
- What size socket is an oil plug Toyota Corolla?
- What size is the oil drain plug on a 2007 Toyota Camry?
- What size drain plug do I need?
- What size is the oil plug on a 2007 Toyota Corolla?
- What size is the Toyota engine oil drain plug?
- What size wrench for Toyota Corolla drain plug?
- What size socket is my oil drain plug?
How much oil does a 2007 Toyota Corolla 1.8 take?
4.4 quarts
Capacity: With filter 4.4 quarts. After refill check oil level.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size is the oil filter wrench on a 2006 Toyota Corolla?
64mm
Aluminum 64mm 14 Flute Oil Filter Wrench for Toyota Corolla/Prius, Fits 1.8L Engines.
What size socket is an oil plug Toyota Corolla?
All plugs have 14mm hex – just one wrench works for all.
What size is the oil drain plug on a 2007 Toyota Camry?
Inside diameter: 0.48″.
What size drain plug do I need?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size is the oil plug on a 2007 Toyota Corolla?
Notes: AutoGrade – oil-tite, M12 x 1.25 Thread size. SAE/Metric 14 mm Head size.
What size is the Toyota engine oil drain plug?
It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.
What size wrench for Toyota Corolla drain plug?
Engine Oil and Filter Change
After warming up the engine safely situate the vehicle so that you can access the drain bolt and oil filter housing. Place the drain pan beneath the engine and use the 14mm wrench or socket to remove the drain bolt and let drain.
What size socket is my oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
