The oil drain plug size on a 2007 Honda Ridgeline is not explicitly mentioned in the search results. However, it is common for Honda vehicles to have a drain plug size of 17mm. This size is often used for both the J35 V6 engine and the I4 engine, so it is likely that the 2007 Honda Ridgeline also uses a 17mm drain plug. Please note that it is always recommended to consult the vehicle’s owner’s manual or contact a Honda dealership for the most accurate and up-to-date information.
Contents
- Are Honda bolts SAE or metric?
- How many quarts of oil does a 2007 Honda Ridgeline take?
- How much oil does a 2007 Honda Ridgeline 3.5 take?
- What size bolt is Honda oil drain plug?
- Are all oil drain bolts the same size?
- What size socket is the oil drain plug?
- How much oil does a 3.5 L Ridgeline take?
- What tool should you use to loosen the oil pan drain plug?
- What size is the oil drain plug on a 2007 Honda Pilot?
- Do all cars have the same size oil drain plug?
Are Honda bolts SAE or metric?
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.
How many quarts of oil does a 2007 Honda Ridgeline take?
Capacity: With filter 4.5 quarts. After refill check oil level.
How much oil does a 2007 Honda Ridgeline 3.5 take?
And summarized at the end of this short video the ridgeline’s oil filter is located here and the 17 millimeter drain plug is right next to it. I used a pretty small 65 millimeter 14 flute cap wrench.
What size bolt is Honda oil drain plug?
The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself.
Are all oil drain bolts the same size?
It is not too difficult to measure the size if you get the right tools. Generally, oil drain plugs do only come in a couple of sizes. A given car maker would generally use the same size plug in all their cars, it’s cheaper and easier that way. Some oil plugs are marked with sizes on the surface, like M12x1.
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
How much oil does a 3.5 L Ridgeline take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.4 quarts. w/of. After refill check oil level. |
| Capacity: | 5.7 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What tool should you use to loosen the oil pan drain plug?
It. So we’re going to put our closed in wrench on it first because that provides a better purchase.
What size is the oil drain plug on a 2007 Honda Pilot?
This guy is going to take a 17 millimeter to get that drain plug off of course use some gloves you are gonna get oil on your hands again no matter how care for you are here’s those chalks I was
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
